I'm transferring about 30GB or so of files over ethernet, airport turned off. and its only transfering at max 12MBps or roughly 100Mbps. I've configured the Ethernet on my MB manually to 1000Mb MTU1500 full duplex.
On the TC i see where you can configure the ethernet WAN port but when I try to configure it to 1000 it says it is unplugged. Not real sure why that would matter when transferring files but tried it anyways. I have a Belkin Fastcat Cat 5e patch cable going to and from which is rated for gigabit speed. So I'm not sure what to do. I went through and reconfigured the TC b/c after a few restarts it just wouldn't do anything.
Any ideas?
On the TC i see where you can configure the ethernet WAN port but when I try to configure it to 1000 it says it is unplugged. Not real sure why that would matter when transferring files but tried it anyways. I have a Belkin Fastcat Cat 5e patch cable going to and from which is rated for gigabit speed. So I'm not sure what to do. I went through and reconfigured the TC b/c after a few restarts it just wouldn't do anything.
Any ideas?