Tips on removing bubbles spigen glass iPhone 11 Pro Max

[Alexrat1996]

Hello after installing spigen glass for iPhone 11 Pro Max I notices these strange bubbles how do I remove it ?

 

[Lekro]

Carefully lift the edge of the screen protector that is closest to the bubbles, just enough so that you reach them, then as you let go slowly of the edge, push out the air under the protector with a tool, or if you don't have that, a credit card.

You have to be really careful lifting the edge, since it is not an edge-to-edge 3D screen protector. Do not mess up the adhesive under it with your fingernail or else, it won't stick back on and you will have a permanent bubble there.

 

[Alexrat1996]

Carefully lift the edge of the screen protector that is closest to the bubbles, just enough so that you reach them, then as you let go slowly of the edge, push out the air under the protector with a tool, or if you don't have that, a credit card.

You have to be really careful lifting the edge, since it is not an edge-to-edge 3D screen protector. Do not mess up the adhesive under it with your fingernail or else, it won't stick back on and you will have a permanent bubble there.

I don’t that lift and still those bubbles what else can I try ?

 

[bobsamm]

Nothing now. Should of cleaned the phone properly first, use the tray version next time.

 

[JPack]

Toss it and replace with another. Glass protectors are cheap. This one has defective adhesive or some dust on the glass.

 

[Alexrat1996]

Toss it and replace with another. Glass protectors are cheap. This one has defective adhesive or some dust on the glass.

If I replace it. It won’t scratch the screen correct ?

 

[JPack]

If I replace it. It won’t scratch the screen correct ?

I would suggest upgrading to a better screen protector while you're at it. These ones without full edge coverage look cheap.

 

[Alexrat1996]

I would suggest upgrading to a better screen protector while you're at it. These ones without full edge coverage look cheap.

I’m about to try the zagg vision guard I had for my xs Max I have laying around to see if it’s better.

 

[Alexrat1996]

Update at&t store failed with the replacement they gave me one free but it’s still so so

 

[bobsamm]

Double notch lol

 

[rui no onna]

Buy a Belkin Screen Protector in a brick and mortar Apple Store and have them install it with their equipment.

 

[Alexrat1996]

Buy a Belkin Screen Protector in a brick and mortar Apple Store and have them install it with their equipment.

I can try but I already tried three glass covers won’t that damage screen ?

 

[bobsamm]

Yes, i would arrange express replacement.

 

[Alexrat1996]

Yes, i would arrange express replacement.

For ?

 

[Dino F]

Nothing now. Should of cleaned the phone properly first, use the tray version next time.

....the 'book' version is far better.

 

[akash.nu]

I can try but I already tried three glass covers won’t that damage screen ?

What makes you think the screen protectors damage the screen?!

 

[DCIFRTHS]

What makes you think the screen protectors damage the screen?!

Possibly he's thinking that the repeated removal of the screen protectors will damage the oleophobic coating?

 

[Wide opeN]

Never install a screen protector in the first place. They're dumb.

Same could be said for cases, but with OCD, it's too much of a hassle to carry naked.

 

[Alexrat1996]

Possibly he's thinking that the repeated removal of the screen protectors will damage the oleophobic coating?

That I mean

 

[Ta0jin]

That I mean

It wont damage it. Besides you’re using a screen protector so even if it did (which it doesn’t) you’re not using the oleophobic coating anyway.

 

[alpi123]

You should've just tried to push a little bit harder on the screen when you first had the Spigen Glass. I know people said it can't be fixed but it most probably can. It happens to me too and with a little bit of pressure and holding it like that it goes away.

In rare cases it doesn't which is due to bad glue.

 

[Hooterville]

You might have some junk under there.