Unlock 1.1.2/1.1.3 w/ 4.02.13_G

[LeeSano]

My first post, hope I put it in the right spot,
enjoy.


SIM unlocking iPhone 1.1.2 and with boot loader v4.6
Here is the exact details!!

** I am not responsible for any damages caused by you trying to unlock your iPhone **



This tutorial work on OTB ( out the box)
1.1.2 & 1.1.3 FW Only... with 4.02.13_G Baseband

This means if your iPhone came shipped with 1.1.2 or 1.1.3 out of the box,
you can use this method to unlock your iPhone.



Let's begin.


1. Downgrade phone using iBrickr and iTunes to 1.0.2 FW, Then install "Installer" app.

iBrickr can be found here.
http://ibrickr.com/downloads/ibrickr_v0.91.zip

If you get any problems while you downgrade the firmware to 1.0.2,

**for example "error 1".

You may need to enter in DFU mode in order to use iTunes to install FW 1.0.2
If you don't know how to go in DFU mode follow these steps.
This is how go in special DFU mode. :

* Attach the phone to the pc
* Turn the phone off
* Hold power and home together for *exactly* 10 seconds
* Release power but keep holding home until the pc beeps as a USB device is recognized.
* At no point will the display come on. Now your restore should work.


ONCE YOU SUCESSFULLY DOWNGRADED , THEN YOU CAN CONTINUE TO THE NEXT STEP BELOW:


2. You need to jailbreak and activate it..


Here's how:

First run the "apptapp" program on your PC, and from the list, select 1.0.2 by placing a check next to the 1.0.2 FW box.
.. it will "jailbreak and install "installer" in the iphone.

AppTapp can be downloaded from here:
http://www.360patches.com/Xmods/AppTappInstaller.exe

Then you need to run the Pacay on your PC and follow the instructions on the screen,
.. this will jailbreak and activate your iphone with you tube support
.. which will be on 1.0.2

Paycay can be downloaded from here:
http://www.360patches.com/Xmods/paycay.rar


ONCE YOU SUCESSFULLY JAILBREAK AND ACTIVATE THE IPHONE, THEN YOU CAN CONTINUE TO THE NEXT STEP BELOW:



3. Now log on to a wi-fi access point and Run the "Installer" program on your iPhone,
then install the "Term-vt100" program via "Installer" on your jailbreaked iPhone 1.1.2 OTB


ONCE YOU SUCESSFULLY INSTALLED "Term-vt100" , CONTINUE TO THE NEXT STEP BELOW:



4. Next, let's Copy some files to your iPhone using iBrickr.

according to your baseband.
copy the downloaded files, to usr/bin on your iPhone.

In example: For Baseband 4.02.13_G
copy ( ICE04.02.13_G.fls & ICE04.02.13_G.eep) to usr/bin on your iPhone, using iBrickr of course!

The files are found here: http://george.zjlotto.com/index.php/baseband/

** Important: CHMOD ( Give permission) all data to 755

** If you need to know more on giving permission to data file read this...
http://www.pair.com/support/knowledge_base/the_basics/file_permissions.html

Also copy the "secpack" from this link, http://lpahome.com/geohot/112otb.rar to the usr/bin

** Only the one named "secpack"


ONCE YOU SUCESSFULLY COPIED THE NEEDED FILES , CONTINUE TO THE FINAL STEP BELOW:


5. On the iPhone start Term-vt100, press Enter and login with the
password dottie or alpine

Paste the following commands in Term-vt100, or manually type them in:

-“launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist” ENTER
“cd /usr/bin” ENTER
“./gunlock secpack ICE04.02.13_G.fls” ENTER
“launchctl load /System/Library/LaunchDaemons/com.apple.CommCenter.plist” ENTER


That's it!


If this has helped you understand enough to complete the unlock, be sure to donate using PayPal to:


leesano24@optonline.net



Thanks,
LeeSano

Here is a link to a great tutorial, http://www.iphone-hacks.com/downloads/file/91
which includes the files and the instructions. But, it doesn't go into details like me,
so please donate any amount you can, no amount small enough.
Much appreciated.

Send Money with PayPal to:
leesano24@optonline.net