Unlock problems

[mandy01]

Hello friends
I've been trying to get the Mac up and running for days.

With Arduino 1.8.10 and Tennsy 2 ++ the error message appears when checking
#include <usb_keyboard.h>
if I omit that (include <usb_)
then the error message comes
keyboard_modifier_keys = 0;

Board - Tennsy++2
USB Typ - Keybord-Mous-joystick

Please help



#include <usb_keyboard.h>
// This code was developed and written by Overtech
// This code is licensed under Apache 2.0 License
// http://www.apache.org/licenses/LICENSE-2.0.txt
// Limitation of Liability. In no event and under no legal theory,
// whether in tort (including negligence), contract, or otherwise,
// unless required by applicable law (such as deliberate and grossly
// negligent acts) or agreed to in writing, shall any Contributor be
// liable to You for damages, including any direct, indirect, special,
// incidental, or consequential damages of any character arising as a
// result of this License or out of the use or inability to use the
// Work (including but not limited to damages for loss of goodwill,
// work stoppage, computer failure or malfunction, or any and all
// other commercial damages or losses), even if such Contributor
// has been advised of the possibility of such damages.
// This code is indented for people who are not able to contact
// apple support and I am in no way liable for any damage or
// problems this code might cause.

const int ledPin = 13;
int counter = 0;

//waits for iCould
int firstloop = 0;
int secondloop = 0;
int thirdloop = 0;
boolean firstcompleted = false;
boolean secondcompleted = false;
int fakecounter = counter;
char pin[]="xxxx";

void setup() {
pinMode(ledPin, OUTPUT);
delay(10000);
digitalWrite(ledPin, LOW);
}

void loop(){
keyboard_modifier_keys = 0;
//lets wait 1minute and 1 second
if (firstloop >= 5){
delay(61000);
firstcompleted = true;
digitalWrite(ledPin, LOW);
}
else if ((firstloop < 5) && (firstcompleted == false)){
digitalWrite(ledPin, HIGH);
++firstloop;
digitalWrite(ledPin, LOW);
}
//lets wait 5 minutes and one second
if ((secondloop >= 1) && (secondcompleted == false) && (firstcompleted == true)){
delay(301000);
secondloop = 0;
secondcompleted = true;
digitalWrite(ledPin, LOW);
}
else if ((secondloop < 1) && (secondcompleted == false) && (firstcompleted == true)){
++secondloop;
digitalWrite(ledPin, LOW);
}
//lets wait 15 minutes and 1 second
if ((thirdloop >= 1) && (secondcompleted == true)){
delay(901000);
thirdloop = 0;
secondcompleted = false;
firstcompleted = false;
firstloop = 0;
secondloop = 0;
thirdloop = 0;
digitalWrite(ledPin, LOW);
}
else if ((thirdloop < 1) && (secondcompleted == true)){
++thirdloop;
digitalWrite(ledPin, LOW);
}
//lets get to work
if (counter <= 9999){
delay(100503);
digitalWrite(ledPin, LOW);
delay(7049);
digitalWrite(ledPin, HIGH);
sprintf(pin, "%04d", fakecounter);
Keyboard.press(pin[0]);
delay(450);
Keyboard.release(pin[0]);
delay(420);
Keyboard.press(pin[1]);
delay(398);
Keyboard.release(pin[1]);
delay(510);
Keyboard.press(pin[2]);
delay(421);
Keyboard.release(pin[2]);
delay(423);
Keyboard.press(pin[3]);
delay(430);
Keyboard.release(pin[3]);
delay(525);
Keyboard.press(KEY_ENTER);
delay(405);
Keyboard.release(KEY_ENTER);
digitalWrite(ledPin, LOW);
}
//reached 4 digit PIN max value
if (counter > 9999){
for (int blinkies = 0; blinkies < 8; blinkies++) {
digitalWrite(ledPin, HIGH);
delay(20);
digitalWrite(ledPin, LOW);
delay(200);
}
delay(6000);
}
++counter;
fakecounter = counter;
}

 

[mandy01]

Hi there
unfortunately I didn't get any further and nobody answered.

my english is not that good maybe because of that

 

[maflynn]

Hi there

What are you looking to do?

 

[jerryk]

I suggest you find a forum that specializes in using the Teensy board.

And posting the error message might help. You posted the code but I don't see the text of the message. Was #include <usb_keyboard.h> complaining that it could not find usb_keyboard.h or something else? If so, ensure the file was on path.

My guess is this has nothing to do with your Mac, and is something in how you set you the development environment for this board.

I have no experience with this particular board, but a lot with Arduino and other small format device development.