Wake up issues with a new SSD

[bravetto]

I have a problem with Sleep Wake on a MacBook pro early 2011 with Yosemite. After the MacBook goes to sleep, close the lid and you try to wake it,open the lid the notebook remain with a blank screen
To wakeup I must press the power button for few second and after the pc wakeup from stop situation with the hibernate bar.
The problem appear when I changed my traditional hard drive with a Samsung evo 840 SSD

 

[JTToft]

Run the following command in Terminal and report what it outputs:

pmset -g | grep hibernatemode

 

[bravetto]

Run the following command in Terminal and report what it outputs:

pmset -g | grep hibernatemode

by default it report 3
I've changed to 0

but the problem not solved ...

 

[JTToft]

by default it report 3
I've changed to 0

but the problem not solved ...

- Strange. If it's at 0 it shouldn't be possible for that progress bar to appear as far as I know.

 

[bravetto]

- Strange. If it's at 0 it shouldn't be possible for that progress bar to appear as far as I know.

I don't know what to do
I have tried everything. PRAM reset SMC reset
everry kind of third party software .... but no changes

 

[JTToft]

I don't know what to do
I have tried everything. PRAM reset SMC reset
everry kind of third party software .... but no changes

- Have you tried it with another disk to see if that makes a difference?
If it does, something's likely wrong with your SSD (and then it's a good thing Samsung has a 3-year warranty on it).

Also, are you running with TRIM? If you are, try disabling it. If not, try enabling it. I doubt that's the issue, though, but it's worth a shot.

 

[bravetto]

- Have you tried it with another disk to see if that makes a difference?
If it does, something's likely wrong with your SSD (and then it's a good thing Samsung has a 3-year warranty on it).

Also, are you running with TRIM? If you are, try disabling it. If not, try enabling it. I doubt that's the issue, though, but it's worth a shot.

I think it's my last chance to try with a traditional HHD

For Trim , I've yet tried with both modes, but the result is the same