Was trying to replace Digitizer and LCD until I Ripped Ribbon Cable #2

[Egypt]

How bad is ripping cable #2? I was trying to remove the screws that was attached from the lcd to the metal holding but I couldnt unscrew them because they were too tight so i grew restless and decided to take the glass off which then i found cable #2 detached from the lcd and now im sitting here not having any idea what to do.


Is it needed? Is it replaceable?

 

[Applejuiced]

Im pretty sure its needed.
You shouldnt have any extra parts when you're done

 

[Egypt]

Im pretty sure its needed.
You shouldnt have any extra parts when you're done

Wow okay do you have any information on cable #2?

 

[hamlinspahn]

Cable #2

I would bet that there are no more extra parts. LOL So here is something that might help you.
http://www.powerbookmedic.com/xcart1/_search.php?is_hc=Y&mode=search&q=iphone&x=0&y=0

 

[Penguissimo]

Yeah, they don't usually put parts inside a device this size unless they're needed.

The first hit on Google for "iphone ribbon cable #2" contains replacement instructions, and the third hit contains places you can buy the part.

 

[NETEFX.NET]

Cable 2

Cable 2 is the digitizer cable from the glass/digitizer assembly to the logic board. If it is ripped, you will not have any interaction with your phone via the touch panel. You will need to perform a glass / digitizer repair or have it done by a professional.

 

[Egypt]

Cable 2 is the digitizer cable from the glass/digitizer assembly to the logic board. If it is ripped, you will not have any interaction with your phone via the touch panel. You will need to perform a glass / digitizer repair or have it done by a professional.

OMG I FREAKING LOVE YOU.

Im such an idiot i didnt realize that THAT ribbon was for the glass digitizer which i was replacing so it didnt matter!!!!!!!!!!!!!

THERE IS HOPE!!!!!!!!!!!!!!!!!!!!!!!!!!!!