So i had this Accelsior collecting dust for some time while the Windows install in my 5,1 is at one of the slow SATA-ports. Idea was to speed it up a little, at least to the SSDs potential, by using this PCIe-card.
It's a Win 10 legacy install from DVD, updated to Win 11 Enterprise. It sits on it's own SAMSUNG 860 EVO 1TB. Boots fine at any of the normal SATA-ports, trays as well as in the optical departement. But with the Accelsior it just does not. Not even if it is the only bootable device in the machine.
I even activated AHCI-mode, following this guide. AHCI show up well activated in device manager. But no luck with booting with the Accelsior so far!
Any ideas anybody?
It's a Win 10 legacy install from DVD, updated to Win 11 Enterprise. It sits on it's own SAMSUNG 860 EVO 1TB. Boots fine at any of the normal SATA-ports, trays as well as in the optical departement. But with the Accelsior it just does not. Not even if it is the only bootable device in the machine.
I even activated AHCI-mode, following this guide. AHCI show up well activated in device manager. But no luck with booting with the Accelsior so far!
Any ideas anybody?