Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

acousticbiker

macrumors 6502a
Original poster
Jun 28, 2008
983
199
I use a Belkin Boost Stand and Logitech Powered wireless charging stands. With the iPhone 14 Pro, the camera bump has gotten larger and the phone is noticeably hot when I remove the phone from the charger.

Assuming this is not a good thing to happen repeatedly over the long term, anyone know of a wireless charging stand which sits entirely below the camera bump to allow for charging without a gap? (I prefer a stand for one-handed use vs having to use a second hand to remove a MagSafe puck and also for visibility over a pad that sits flat)
 
I’ve been using this one for a year or so, love it

 
I use a Belkin Boost Stand and Logitech Powered wireless charging stands. With the iPhone 14 Pro, the camera bump has gotten larger and the phone is noticeably hot when I remove the phone from the charger.

Assuming this is not a good thing to happen repeatedly over the long term, anyone know of a wireless charging stand which sits entirely below the camera bump to allow for charging without a gap? (I prefer a stand for one-handed use vs having to use a second hand to remove a MagSafe puck and also for visibility over a pad that sits flat)

I have the Belkin Boost too and noticed if I lay the phone flat against it, the charging area doesn't line up! I have to put it slightly to one side which, as you say, means it's no longer flush and so warms up more.

Fortunately, I also have an Anker PowerWave stand which my 14 Pro snaps onto perfectly. It was available here, but I think it's been replaced with this one.

The larger lens arrangement has definitely made things a bit more snug as you can see from my photos of it on the Anker (with and without case). It only just fits.

IMG_0347.jpg


IMG_0350.jpg
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
I use a Belkin Boost Stand and Logitech Powered wireless charging stands. With the iPhone 14 Pro, the camera bump has gotten larger and the phone is noticeably hot when I remove the phone from the charger.

Assuming this is not a good thing to happen repeatedly over the long term, anyone know of a wireless charging stand which sits entirely below the camera bump to allow for charging without a gap? (I prefer a stand for one-handed use vs having to use a second hand to remove a MagSafe puck and also for visibility over a pad that sits flat)

I have the Belkin Boost too and noticed if I lay the phone flat against it, the charging area doesn't line up! I have to put it slightly to one side which, as you say, means it's no longer flush and so warms up more.

Fortunately, I also have an Anker PowerWave stand which my 14 Pro snaps onto perfectly. It was available here, but I think it's been replaced with this one.

The larger lens arrangement has definitely made things a bit more snug as you can see from my photos of it on the Anker (with and without case). It only just fits.

View attachment 2079670

View attachment 2079673
they have multiple stands named Boost in some way, so not sure which one OP has.

I have this one and my iPhone 14 Pro fits it fully, no issues.
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
  • Like
Reactions: heelsbigc
I’m using a Belkin Boost Charge Pro 3 in 1
The wireless charger sits very far from the camera module as you can see in the pictures. Phone model is the 14 Pro Max

e3e3cc9da77fad76ec21d5042e81613a.jpg


4acf891d23c7c4c9445e257d816c4442.jpg


999b2861f0617323cbe25afe5006d348.jpg
 
they have multiple stands named Boost in some way, so not sure which one OP has.

I have this one and my iPhone 14 Pro fits it fully, no issues.

Good point. This is the one I was referring to. My husband also has this one which has the same problem. The pad on both is so large that with the new phone, the lens area has to come into contact with it or it won't align.
 

Attachments

  • IMG_0354.jpg
    IMG_0354.jpg
    350.6 KB · Views: 151
  • IMG_0359.jpg
    IMG_0359.jpg
    284.1 KB · Views: 125
  • IMG_0356.jpg
    IMG_0356.jpg
    262.7 KB · Views: 132
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
  • 51o7anYvB6L._AC_SX522_.jpg


Belkin Magnetic Wireless Charger, (Power Supply Not Included) Magnetic Wireless Charging Stand, Compatible with MagSafe for iPhone 13, 12, Pro,​



Hows is this working with apple iPhone 14 Pro, Pro max? same any issues with the camera area? MagSafe for iPhone 13, 12, Pro, Pro Max, Mini
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
  • 51o7anYvB6L._AC_SX522_.jpg


Belkin Magnetic Wireless Charger, (Power Supply Not Included) Magnetic Wireless Charging Stand, Compatible with MagSafe for iPhone 13, 12, Pro,​



Hows is this working with apple iPhone 14 Pro, Pro max? same any issues with the camera area? MagSafe for iPhone 13, 12, Pro, Pro Max, Mini
I was wondering about that one, too, especially whether the phone can be removed with one hand without the stand moving around
 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
I got this one yertrday and love it!
works with my 14 PM Thanos and AW Ultra.
It works great with a case or without a case on my 14 PM

616sQSWon2L._AC_SL1500_.jpg




 
As an Amazon Associate, MacRumors earns a commission from qualifying purchases made through links in this post.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.