Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

Six0Four

macrumors 65816
Original poster
Mar 27, 2020
1,159
1,910
Well i've been through 8 iPhones. XR's and 11's. Every single one had either a dust spec under the front or black glass where the camera is. Might be hard to see at first but once the light hits it you'll notice it. 3 also had a metal shaving/flake behind the front screen. Gotta really look close. All bought from Best buy and the Apple store in Canada.

So my solution was to learn how to fix it myself with a $20 kits from Amazon.

Seriously Apple, step up the quality control. Wow.
 
Last edited:
yeah i have noticed some specks of dust under my iphones (7 plus, X , 11 pro )..i know that the quality of image does not effect...fixing something like this it is not easy for all...we must accept this and some else..health to everyone
 
Yup it would void your warranty if they knew. In my case i re-applied the exact same gasket adhesive as the OEM so i don't know how they would know.
[automerge]1585376127[/automerge]
yeah i have noticed some specks of dust under my iphones (7 plus, X , 11 pro )..i know that the quality of image does not effect...fixing something like this it is not easy for all...we must accept this and some else..health to everyone

Ya in most cases it does not effect image quality. It's usually on the black part just to the side. But my ocd wont allow it lol. Although it could over time end up right on the sensor so i would rather just remove it.
 
If you’re ok with no warranty just be careful with the device later on. These gaskets I believe protect against water damage and Apple would replace them when they open a phone, from what I learned here.
 
If you’re ok with no warranty just be careful with the device later on. These gaskets I believe protect against water damage and Apple would replace them when they open a phone, from what I learned here.

Ya i'm sure they do replace the gasket. The thing is it's not as simple as just opening the screen and blowing out the dust. You have to actually wipe off the dust because it is usually stuck to the underside of the glass from the factory. So it doesn't blow out on it's own. Trusting Apple to do this perfectly is a pretty big risk unless they have an excellent eye.

In 15 years i've never dropped a phone in water so i don't plan to start now. Fingers crossed though lol.
 
Ya i'm sure they do replace the gasket. The thing is it's not as simple as just opening the screen and blowing out the dust. You have to actually wipe off the dust because it is usually stuck to the underside of the glass from the factory. So it doesn't blow out on it's own. Trusting Apple to do this perfectly is a pretty big risk unless they have an excellent eye.

In 15 years i've never dropped a phone in water so i don't plan to start now. Fingers crossed though lol.

I know we all tend to try and avoid water contact where possible. But there are days, you know, where just anything goes wrong.

I had a small mobile phone drop out of a shirt pocket many years ago - it bounced of the floor a few times until it fell into a glass of water meters away. Maybe that’s just my luck though :D
 
I know we all tend to try and avoid water contact where possible. But there are days, you know, where just anything goes wrong.

I had a small mobile phone drop out of a shirt pocket many years ago - it bounced of the floor a few times until it fell into a glass of water meters away. Maybe that’s just my luck though :D

Oh totally and now that i said that i'm probably gonna drop it in the toilet tomorrow lol.

I think i did a pretty good job at applying a new gasket though so we'll wait and see.
 
  • Like
Reactions: ericwn
In my case i re-applied the exact same gasket adhesive as the OEM so i don't know how they would know

So you’re saying you don’t think Apple is not trained to detect that you opened your phone? (You wouldn’t be the first.) I guarantee they can, even by looking at the Pentolobe screws, they probably can see ‘track wear’ along the base.

Plus, how would you know what gasket adhesive that they’re using? I mean, you can see the same color perhaps, but you wouldn’t be able to find the same factory adhesive they’re using specifically.
 
So you’re saying you don’t think Apple is not trained to detect that you opened your phone? (You wouldn’t be the first.) I guarantee they can, even by looking at the Pentolobe screws, they probably can see ‘track wear’ along the base.

Plus, how would you know what gasket adhesive that they’re using? I mean, you can see the same color perhaps, but you wouldn’t be able to find the same factory adhesive they’re using specifically.

Do they take out a jewelers loupe and look at the wear on the screws ? Ya that's possible. All i'm saying is the gaskets look damn similar. But there may be an easy tell that Apple can notice in a second.

When i decided to open it up i expected it to void my warranty. But for me it was worth it since i don't have the time or patience to exchange phone after phone.

After opening it up and watching some videos of others doing the same it makes me feel a bit more comfortable knowing that if any minor issues come up that i could probably just fix it on my own.
 
  • Like
Reactions: Lekro
I’ve done multiple housing swaps for iPhone X to qualify for warranty replacement due to another issue.

It’s possible to do it right and without leaving a trace.
 
  • Like
Reactions: Six0Four
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.