Sidebar Sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

iLoome Glass Protector+Power Support Air Jacket combo pics

N

nin7474

macrumors 6502
Original poster
Mar 29, 2009
285
2
Just installed the iLoome glass protector and PS Air Jacket(matte clear) on my 6 Gold. Pics for those wondering about either products or this combo.
Some things I wondered about both products, answered.

-iLoome tempered glass protector(white)

1. The glass is kinda thick BUT matches up nicely with the PS AJ top IMO.(see pic of corner)
2. White border is definitely noticeable. I'll decide if I want to keep it after using it outside on a sunny day.
3. Glass is very easy to install.
4. The edge of it goes right up to the Gold part.
5. Edge to edge usability seem the same so far.
6. Screen is VERY slippery and smooth. I placed it face down on some envelopes/paper and it slid off by itself. Luckily onto the carpet.

-Power Support Air Jacket(matte clear)

1. The Matte Clear has a nice texture. Not slippery but almost like a smooth, suede feel like my Speck case on my Macbook. If that makes sense.
2. VERY minimalist. THIN
3. The rear camera is "protected" so NO LIFT when on it's back.
4. The buttons doesn't stick out from the case.

Overall, I like this combo. Looks stylish and keeps the iPhone 6 thin factor.


abf8dd3d6ee764f7222d88bb97ab72c2.jpg
1e54593745c064439c5b0f4f3a2a1300.jpg
0775f3d5dfec8e05bfd7467b3ce40153.jpg
54302cb314bb6677df15ce23906247af.jpg
a2ac94cf8d70896a03f3f961286013de.jpg
adce2f373e9fbf10348107298750c5bc.jpg
 
Last edited:
Looks good.

For those that don't like it, remember what you mom said. If you can't say something nice, don't say anything at all.
 
just cancelled my order of 4 iloome glass screen protectors, its ugly and thick, the white edges are visible and its too thick, thank you for sharing
 
map1978 said:
Return the screen protector :eek:
Click to expand...

I don't understand all the negative post about the iLoome screen protector? If you don't like it don't post or say anything. I understand if you got the product and didn't like it. I should be getting mine soon and will attempt to test it out with my cases even the Apple one.
 
ichii said:
I don't understand all the negative post about the iLoome screen protector? If you don't like it don't post or say anything.
Click to expand...

Uh, because (most of us) live in a free society where we're allowed to express our opinions even if you don't agree with them.
 
The OP said he/she wasn't sure if he /she was going to keep the screen protector. I ordered this one as well but will be sending it back. Unless someone actually comes up with one that fits I'll go without one. I understand that a good fit must be difficult due to the beveled glass. The half moon cutout for the home button makes the protector just so obvious instead of being obscure.
 
Nhwhazup said:
The OP said he/she wasn't sure if he /she was going to keep the screen protector. I ordered this one as well but will be sending it back. Unless someone actually comes up with one that fits I'll go without one. I understand that a good fit must be difficult due to the beveled glass. The half moon cutout for the home button makes the protector just so obvious instead of being obscure.
Click to expand...


I'm leaning towards keeping it. Somehow, IMO it blends into the PS Air Jacket when the screen is on.
 
Geez are we back in the 50s, where everything has to be complimentary. I learn from both what people like and don't like. Some things to me are not obvious. Whoever can build a glass protector that is sleek and unobtrusive is gonna make some bucks.

I'm thinking maybe a 2 piece shell that has a glass front and plastic back that snaps together might work. It'd probably have to be thicker.
A glue-on thin and unobtrusive front glass made with all the delicate fitment needs, curves, small margins seems undo-able.
 
so is this case thick enough to keep camera from touching the table? i know you said yes in your post but how thick is it? can you take a pic of the camera area.
 
ihonda said:
so is this case thick enough to keep camera from touching the table? i know you said yes in your post but how thick is it? can you take a pic of the camera area.
Click to expand...


It JUST goes past the rear camera lens.
 
Just a little, (not really), power support page explains it was designed this way for removal. It's a tight minimal slim case.
 
I stupidly laid it faced down again on some stack of paper on my dresser. Forgetting how slippery the iLoome is. Heard a THUMP.
It survived 4 foot drop onto carpeted floor.
 
That cover glass is probably better in black on a black phone. I'm quite happy with the Power Support Air Jacket case on my 6 Plus in clear, along with a Power Support Crystal protector. Very nice indeed.
 
iLoome Glass Protector+Power Support Air Jacket combo pics

After using it for 3 days. I noticed lines on both sides(left and right) of the white border that creates an annoying rainbow effect.
Going to PM iLoome here and send them a message on Amazon about it.
Hopefully it's just a defective one and I can get an replacement.
 
nin7474 said:
After using it for 3 days. I noticed lines on both sides(left and right) of the white border that creates an annoying rainbow effect.
Going to PM iLoome here and send them a message on Amazon about it.
Hopefully it's just a defective one and I can get an replacement.
Click to expand...

I think is a bad batch. I bought 2 and they both have lines on the side. Is as if the bottom layer was cut short on both side. Hopefully somebody else with the product can chime in.

Edit: I just looked at the pictures that iLoome posted up and it seems that their protector also has that line.
 
Last edited:
Tommyzors said:
I think is a bad batch. I bought 2 and they both have lines on the side. Is as if the bottom layer was cut short on both side. Hopefully somebody else with the product can chime in.

Edit: I just looked at the pictures that iLoome posted up and it seems that their protector also has that line.
Click to expand...


That's disheartening.
 
iLoome Glass Protector+Power Support Air Jacket combo pics

Just wanted to update all that's interested.

iLoome replied and requested pics of the Lines on the sides. Pretty happy with their quick response and the customers satisfaction of their product.:D

Will keep everyone updated on the situation.

Pics of the Lines:mad:

3bf58d083ab4997ca8c0cf2bc4ac29df.jpg

73a63e14b01709d28c64a5d05f46eed2.jpg
 
Last edited:
Update 10/15
They replied to me promptly and admitted it was a defective unit and refunding me.
I'm curious to see if others got a perfect one and can post pics of the sides/no lines.
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back