iLoome Glass Protector+Power Support Air Jacket combo pics

nin7474

macrumors 6502
Original poster
Mar 29, 2009
283
0
Just installed the iLoome glass protector and PS Air Jacket(matte clear) on my 6 Gold. Pics for those wondering about either products or this combo.
Some things I wondered about both products, answered.

-iLoome tempered glass protector(white)

1. The glass is kinda thick BUT matches up nicely with the PS AJ top IMO.(see pic of corner)
2. White border is definitely noticeable. I'll decide if I want to keep it after using it outside on a sunny day.
3. Glass is very easy to install.
4. The edge of it goes right up to the Gold part.
5. Edge to edge usability seem the same so far.
6. Screen is VERY slippery and smooth. I placed it face down on some envelopes/paper and it slid off by itself. Luckily onto the carpet.

-Power Support Air Jacket(matte clear)

1. The Matte Clear has a nice texture. Not slippery but almost like a smooth, suede feel like my Speck case on my Macbook. If that makes sense.
2. VERY minimalist. THIN
3. The rear camera is "protected" so NO LIFT when on it's back.
4. The buttons doesn't stick out from the case.

Overall, I like this combo. Looks stylish and keeps the iPhone 6 thin factor.


 
Last edited:

pocketdoc

macrumors 6502a
Apr 15, 2008
799
37
Looks good.

For those that don't like it, remember what you mom said. If you can't say something nice, don't say anything at all.
 

Mashari

macrumors newbie
Sep 15, 2014
17
0
just cancelled my order of 4 iloome glass screen protectors, its ugly and thick, the white edges are visible and its too thick, thank you for sharing
 

ichii

macrumors 6502a
Sep 20, 2006
527
40
Return the screen protector :eek:
I don't understand all the negative post about the iLoome screen protector? If you don't like it don't post or say anything. I understand if you got the product and didn't like it. I should be getting mine soon and will attempt to test it out with my cases even the Apple one.
 

cnick6

macrumors regular
Sep 14, 2014
175
56
Bellevue, WA
I don't understand all the negative post about the iLoome screen protector? If you don't like it don't post or say anything.
Uh, because (most of us) live in a free society where we're allowed to express our opinions even if you don't agree with them.
 

Nhwhazup

macrumors 68030
Sep 2, 2010
2,538
804
New Hampshire
The OP said he/she wasn't sure if he /she was going to keep the screen protector. I ordered this one as well but will be sending it back. Unless someone actually comes up with one that fits I'll go without one. I understand that a good fit must be difficult due to the beveled glass. The half moon cutout for the home button makes the protector just so obvious instead of being obscure.
 

nin7474

macrumors 6502
Original poster
Mar 29, 2009
283
0
The OP said he/she wasn't sure if he /she was going to keep the screen protector. I ordered this one as well but will be sending it back. Unless someone actually comes up with one that fits I'll go without one. I understand that a good fit must be difficult due to the beveled glass. The half moon cutout for the home button makes the protector just so obvious instead of being obscure.

I'm leaning towards keeping it. Somehow, IMO it blends into the PS Air Jacket when the screen is on.
 

gigaguy

macrumors 65816
Apr 19, 2010
1,351
116
USA
Geez are we back in the 50s, where everything has to be complimentary. I learn from both what people like and don't like. Some things to me are not obvious. Whoever can build a glass protector that is sleek and unobtrusive is gonna make some bucks.

I'm thinking maybe a 2 piece shell that has a glass front and plastic back that snaps together might work. It'd probably have to be thicker.
A glue-on thin and unobtrusive front glass made with all the delicate fitment needs, curves, small margins seems undo-able.
 

ihonda

macrumors 68000
Sep 17, 2009
1,848
194
so is this case thick enough to keep camera from touching the table? i know you said yes in your post but how thick is it? can you take a pic of the camera area.
 

nin7474

macrumors 6502
Original poster
Mar 29, 2009
283
0
so is this case thick enough to keep camera from touching the table? i know you said yes in your post but how thick is it? can you take a pic of the camera area.

It JUST goes past the rear camera lens.
 

gigaguy

macrumors 65816
Apr 19, 2010
1,351
116
USA
Just a little, (not really), power support page explains it was designed this way for removal. It's a tight minimal slim case.
 

nin7474

macrumors 6502
Original poster
Mar 29, 2009
283
0
I stupidly laid it faced down again on some stack of paper on my dresser. Forgetting how slippery the iLoome is. Heard a THUMP.
It survived 4 foot drop onto carpeted floor.
 

Archer1440

Suspended
Mar 10, 2012
730
300
USA
That cover glass is probably better in black on a black phone. I'm quite happy with the Power Support Air Jacket case on my 6 Plus in clear, along with a Power Support Crystal protector. Very nice indeed.
 

nin7474

macrumors 6502
Original poster
Mar 29, 2009
283
0
iLoome Glass Protector+Power Support Air Jacket combo pics

After using it for 3 days. I noticed lines on both sides(left and right) of the white border that creates an annoying rainbow effect.
Going to PM iLoome here and send them a message on Amazon about it.
Hopefully it's just a defective one and I can get an replacement.
 

Tommyzors

macrumors member
Sep 15, 2007
41
4
After using it for 3 days. I noticed lines on both sides(left and right) of the white border that creates an annoying rainbow effect.
Going to PM iLoome here and send them a message on Amazon about it.
Hopefully it's just a defective one and I can get an replacement.
I think is a bad batch. I bought 2 and they both have lines on the side. Is as if the bottom layer was cut short on both side. Hopefully somebody else with the product can chime in.

Edit: I just looked at the pictures that iLoome posted up and it seems that their protector also has that line.
 
Last edited:

nin7474

macrumors 6502
Original poster
Mar 29, 2009
283
0
I think is a bad batch. I bought 2 and they both have lines on the side. Is as if the bottom layer was cut short on both side. Hopefully somebody else with the product can chime in.

Edit: I just looked at the pictures that iLoome posted up and it seems that their protector also has that line.

That's disheartening.
 

nin7474

macrumors 6502
Original poster
Mar 29, 2009
283
0
iLoome Glass Protector+Power Support Air Jacket combo pics

Just wanted to update all that's interested.

iLoome replied and requested pics of the Lines on the sides. Pretty happy with their quick response and the customers satisfaction of their product.:D

Will keep everyone updated on the situation.

Pics of the Lines:mad:


 
Last edited:

nin7474

macrumors 6502
Original poster
Mar 29, 2009
283
0
Update 10/15
They replied to me promptly and admitted it was a defective unit and refunding me.
I'm curious to see if others got a perfect one and can post pics of the sides/no lines.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.