Toggle sidebar Toggle sidebar
Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

MP 7,1 2019 Mac Pro - Installing my own NVMe as boot

johnnymcc

johnnymcc

macrumors regular
Original poster
In my Mac Pro 7,1, I am going to install a WD NVMe that supports 7,000 MB/s as boot drive via an NVMe PCIe card. I plan to clone my current Monterey boot drive onto it. I know there is something about keeping the existing Apple NVMe's installed due to the T2 chip, but wondered about other people's experience with this. Can I completely remove the Apple NVMe's?
 
johnnymcc said:
In my Mac Pro 7,1, I am going to install a WD NVMe that supports 7,000 MB/s as boot drive via an NVMe PCIe card. I plan to clone my current Monterey boot drive onto it. I know there is something about keeping the existing Apple NVMe's installed due to the T2 chip, but wondered about other people's experience with this. Can I completely remove the Apple NVMe's?
Click to expand...

I responded to a similar post. This is from memory over a year ago. I did this when I first got the 7,1 with the intention of using the 4TB Apple SSD as my media drive and a 1TB Samsung NVMe as the boot drive.

It annoyed me that you can't reformat the Apple SSD and have to leave the original MacOS files in there. Otherwise the T2 security chip will not function properly and repeatedly ask for your security password or something like that even if you did enter the correct password. It was an endless cycle. So I had to reset the computer with Apple Configurator.

I find it wasted space to have two MacOS files so I gave up on the idea and just accepted that Apple SSD will be my boot drive. To each their own.
 
You must log in or register to reply here.
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.
Top Bottom
Back