24" iMac Question

Discussion in 'iMac' started by mrpalmer420, Mar 20, 2008.

  1. mrpalmer420 macrumors regular

    mrpalmer420

    Joined:
    Jan 15, 2008
    #1
    Can anyone give me the height of the 24" iMac from base to top of monitor compared to the 20". (or a link to a site that provides this)

    Also can the monitor be straight up and down or is it always on an angle?
     
  2. Techguy172 macrumors 68000

    Joined:
    Feb 2, 2007
    Location:
    Ontario Canada
    #2
    20.5" vs 18.5" Why didn't you check the apple site it's right on there, and yes it can be straight.
     
  3. kkat69 macrumors 68020

    kkat69

    Joined:
    Aug 30, 2007
    Location:
    Atlanta, Ga
    #3
    http://www.apple.com/
     
  4. VoodooDaddy macrumors 65816

    Joined:
    May 14, 2003
    #4
    Size and weight (20-inch)

    * Height: 18.5 inches (46.9 cm)
    * Width: 19.1 inches (48.5 cm)
    * Depth: 7.4 inches (18.9 cm)
    * Weight: 20 pounds (9.1 kg)4


    Size and weight (24-inch)

    * Height: 20.5 inches (52.0 cm)
    * Width: 22.4 inches (56.9 cm)
    * Depth: 8.1 inches (20.7 cm)
    * Weight: 25.4 pounds (11.5 kg

    I took this pic the other day at Frys comparing the 2. As far as the angle you can have it straight up and down.
     

    Attached Files:

  5. andy317 macrumors member

    Joined:
    Mar 13, 2008
    #5
    Sorry to jump in here but are these dimensions when it is at an angle or when they are straight up?

    Thanks
    Andy
     
  6. VoodooDaddy macrumors 65816

    Joined:
    May 14, 2003
    #6
    I would imagine straight up and down.

    *takes measuring tape to my iMac*

    My iMac is not at an angle. The screen is perpendicular to the desk. I measured exactly 18.5" from base to top, and 19 1/8" from side to side.
     
  7. andy317 macrumors member

    Joined:
    Mar 13, 2008
    #7
    How about the depth?

    Is it the depth stated when it is straight up or at an angle?
     
  8. Techguy172 macrumors 68000

    Joined:
    Feb 2, 2007
    Location:
    Ontario Canada
    #8
    That doesn't matter as they are measuring depth by how far the stand sticks out.
     
  9. mrpalmer420 thread starter macrumors regular

    mrpalmer420

    Joined:
    Jan 15, 2008
    #9
    Thank you all so much. I thhought it may be In the apple site but I was running around so much that I wasn't thinking staight when I posted. As for the straight up and down that is great because my comp desk has a stand for the monitor and at an angle I was afraid that I wouldn't be able to see the screen right.
     

Share This Page