hello
i have this device
Macbookpro6,2
A1286
1.30f3
Osx 10.8.2
i5 8go ram
Intel 0046
Nvd gt330m
Gfxcardstatus 2.3 autoswitch
Niresh12495 hackintosh (never been able to boot any other dvd/usb install media)
having this problem :
this frenchy forumer found, i think, exactly the problem, about not the GPU but the tantalum condensators next to it (as i understood)
unfortunately, this guy was reparing lot of macbook in france, but until 2018/19.. and then havent posted since.. hope covid didnt caught that old man, as he is an electronician specialist, but even the forum admins can't reach him anymore.
on my side :
with this macbook, as the snow leopard original disk isn't readable anymore, i was able to ""restore"" the computer using the niresh hackingosh, the only usb media i was ever able to boot on mac (im not a apple expert, far of it)
i have no other apple computers so it's a bit hard to try various .dmg here and here (especially apple's garden's archive mirror) to burn them on dvd or usb : didn't worked.
so since few weeks im trying to work with that niresh hackintosh, well :
it can be installed easily, even if the computer's bottom warm over than my oven
but :
after installation (from usb), it boot ; it warms, but it boot well.
almost all shutdown/poweroff : had to press 3/5 seconds holding powerbutton, or a unlimited serie of 3 beeps until it was forced halted.
but :
problem is, in this situation :
even if the first bootup after installation works like a charm : all next are blocked after the apple startup screen (black apple in white background), and then the screen is totally black/empty, absolutely no clue of computer is still on except the fan still active.. so i have to salvage poweroff it, then it loops freezes at boot..
only solution is to get it reinstalled, about 30/40mins, from usb stick, to get everytime the first startup as correctly usable and well booting..
i even tried with the gfx card status, in auto switched (problem, before i was binding it to intel, but one time it frozen anyway, and i had to reinstall, now i let on automatic..), but today it's still complicated..
any clue or maybe a solution whom can fix it, as im not an eletronician and can't deal with electronics components myself, nor spend a penny for it?
thank you to avoid this computer certain death
i have this device
Macbookpro6,2
A1286
1.30f3
Osx 10.8.2
i5 8go ram
Intel 0046
Nvd gt330m
Gfxcardstatus 2.3 autoswitch
Niresh12495 hackintosh (never been able to boot any other dvd/usb install media)
having this problem :
MacBook Pro - Kernel panic, GPU et VRAM? - Macbook Pro 15" mi 2010
Bonjour, je suis nouveau sur ce forum et remercie les personnes qui participent en partageant des informations souvent interesantes. Mon cas est problématique. J'ai un MBP 15" mi 2010, qui avait toujours bien fonctionné. Depuis plus d'un an il fait des kernels panic a répétition. J'ai fait...
forums.macg.co
this frenchy forumer found, i think, exactly the problem, about not the GPU but the tantalum condensators next to it (as i understood)
unfortunately, this guy was reparing lot of macbook in france, but until 2018/19.. and then havent posted since.. hope covid didnt caught that old man, as he is an electronician specialist, but even the forum admins can't reach him anymore.
on my side :
with this macbook, as the snow leopard original disk isn't readable anymore, i was able to ""restore"" the computer using the niresh hackingosh, the only usb media i was ever able to boot on mac (im not a apple expert, far of it)
i have no other apple computers so it's a bit hard to try various .dmg here and here (especially apple's garden's archive mirror) to burn them on dvd or usb : didn't worked.
so since few weeks im trying to work with that niresh hackintosh, well :
it can be installed easily, even if the computer's bottom warm over than my oven
but :
after installation (from usb), it boot ; it warms, but it boot well.
almost all shutdown/poweroff : had to press 3/5 seconds holding powerbutton, or a unlimited serie of 3 beeps until it was forced halted.
but :
problem is, in this situation :
even if the first bootup after installation works like a charm : all next are blocked after the apple startup screen (black apple in white background), and then the screen is totally black/empty, absolutely no clue of computer is still on except the fan still active.. so i have to salvage poweroff it, then it loops freezes at boot..
only solution is to get it reinstalled, about 30/40mins, from usb stick, to get everytime the first startup as correctly usable and well booting..
i even tried with the gfx card status, in auto switched (problem, before i was binding it to intel, but one time it frozen anyway, and i had to reinstall, now i let on automatic..), but today it's still complicated..
any clue or maybe a solution whom can fix it, as im not an eletronician and can't deal with electronics components myself, nor spend a penny for it?
thank you to avoid this computer certain death