Any Pro Tools LE / PB G4 1.5GHz users?

Discussion in 'Digital Audio' started by SRSound, Jun 8, 2005.

  1. SRSound macrumors 6502

    Jun 7, 2005
    It's time to get a new mobile computer for my recording company but short of bringing in the Pro Tools LE rig to an apple store and testing it myself, are there any users that run Pro Tools LE on a 1.5GHz G4 Powerbook? If so I'd really like to know how smooth it runs (assuming you use an external HD). What track count can you comfortably make? How smooth is editing? How many plug-ins can you use? How many rewire applications? Etc. Anything would be very helpful!

    If it helps I would be replacing a P4 3.0Ghz w/ Hyperthreading & 1GB of RAM with a 12" PB 1.5GHz & 1.256GB of RAM.

  2. pulsewidth947 macrumors 65816


    Jan 25, 2005
    not sure how useful this post will be but here goes.

    my collegues at work use Pro Tools LE on their 700mhz (or thereabouts) 12" iBooks with 1.25 GB ram. As fine as I can ascertain (sp?) its perfectly adequate. Iguess it depends on your project. You say your going to use LE so I assume you are running either Mbox or 002, and depending on what bit/sample rate you use, your harddrive may choke before your processor.

    I'm expecting a 1.67 Ghz PB next week and I'd like to do some tests wtih pro tools at some point. In the mean time the guys over at OSXAudio may be able to give you a better idea.

    May I take this opportunity to rant about how shockingly poor Pro Tools' MIDI support is?! Dammit digidesign - Pro Tools has been around for years.. sort yourself out, or I'll stick with Cubase forever!

    :EDIT: The SoundonSound Forums / Magazine will be a good place to look to. They have a regular Pro Tools section and they highly rate mobility so theres more than likely some information you may find useful.
  3. CanadaRAM macrumors G5


    Oct 11, 2004
    On the Left Coast - Victoria BC Canada
    The brilliant thing about the Powerbook 15" and 17" is that you can add a second Firewire buss to the machine with a PCMCIA card adaptor. This keeps the drive datastream and the digital audio datastream on separate controllers. Just do some investigation on compatibility first - some audio interfaces are incompatible with certain PCMCIA firewire chipsets.
  4. liquidtrance123 macrumors member

    Feb 22, 2005
    Cincinnati, Ohio
    I'm currently using Peak and Audacity on my 1.25GHz mini with 1GB. It takes awhile to load a 2 hour Armin Van Buuren mix but thats to be somewhat expected. However it seems to max the CPU fairly quick.

    edit: i'm still looking for an alternative to Peak, anyone know a good program to rip individual songs out of a 2hour mix? :confused:
  5. SRSound thread starter macrumors 6502

    Jun 7, 2005
    Yes, I run an 002R. My current project was recorded originally on an HD system using an average of 55 tracks per song, but of course i will have to deactivate all but 32 for LE editing. My hope is to be able to work with a full track count at once while having ample room for plug ins. If needing it to be mobile wasnt required, I would have already had a dual 2.5GHz powermac but alas...

    What's the advantage of separating the firewire buss with a PCMIA card?

    Thanks again!
  6. pulsewidth947 macrumors 65816


    Jan 25, 2005
    The powerbook shares its FW bandwidth (i forget the proper term for it so that will do) between FW400 and 800 ports. Say if you are using your FW400 port with your HD daisy chained to your 002r, your going to be sharing the bandwidth between the two.

    I you run one from the built in interface, and the other from a PCMCIA you effectively have full bandwidth for each device.

    This would become a big issue when you have large track counts, I dont know if it would be a big deal as you have a max of 32 tracks, as it would depend on what sample rate you are using.

    If only you could fold a Powermac in half to mac it portable :rolleyes:
  7. JFreak macrumors 68040


    Jul 11, 2003
    Tampere, Finland
    i use protools with a 1.25GHz powerbook and it works fine. benchmarks are not useful as all plugs stress the system a bit differently, but i can get good performance using mainly:
    - plugs
    - plugs
    - plugs
    - focusrite d2/d3
    - waves renaissance & musicians bundle

    two things... i like to use external reverbs as those sound more pleasing to my ear than the reverb plugs available to LE platform. that saves a lot of cpu for other processing. i also tend to do submixes as one needs to commit to something every now and then, which also saves a lot of cpu power but that's a trick one naturally cannot use within a live session. (i do live foh mixing with my protools rig, too)

Share This Page