Apple AirPort Extreme and HP Envy 110 printer

Discussion in 'Mac Accessories' started by m11rphy, May 24, 2013.

  1. m11rphy macrumors 6502

    Dec 26, 2009
    Hi all,

    I have an AirPort Extreme creating a wireless network to which I have connected an iMac MacBook and HP envy 110 wireless printer all connected wirelessly and all is working perfect.

    However by grandad has the the exact same set up and the HP envy 110 wireless printer will not connect to the wireless network. The 2 Macs are working fine and can connect to the Internet ect.

    We have checked the settings on airport utility and his and mine setup is matching correctly. We even tried using a different router in his setup in place of the AirPort Extreme and both macs and printer could connect so I know the printer is not at fault. We have reset the AirPort Extreme and updated the the firmware but the printer will still not connect.

    Has anyone had a similar problem or have any suggestions to get this working ?

    Thanks in advance for any assistance
  2. m11rphy thread starter macrumors 6502

    Dec 26, 2009
  3. m11rphy thread starter macrumors 6502

    Dec 26, 2009
  4. Gav2k macrumors G3


    Jul 24, 2009
    Tried his printer at your place and yours at his?
  5. AlexMaximus macrumors 6502a


    Aug 15, 2006
    A400M Base
    I have that exact printer

    I have that printer too. Unfortunately HP had some small glitches when they released the printer, especially the early ones. When you check out the HP driver webpage, you will find a firmware upgrade of that printer as well.

    Out of the blue, I would do a blind diagnose and tell you, check the firmware of both printers. I am sure they are different.

    Important: Before you do the firmware upgrade, make sure you read in the internet about that problem. Many people posted issues with that as far as I remember.

    Check your firmware and let us know if that fixed it.


Share This Page