Hello,
Any help on this matter would be greatly appreciated. I have an auditorium like setup with two projectors on each side of a stage. At the back of the room I have two smaller rooms that cannot fully see the projectors, so we installed TVs as monitors. Now at the control panel there is an HDMI switch that has the apple TV as the input and then the two outputs are both splitters. One splitter feeds both projectors, the other feeds the tv screens.
The problem I am having is that when powered up I can see the ATV on the projectors, but not the tv screens. No matter how I work it the tv screen never works with the apple tv through the switch. If I plug the tv screens directly into the apple tv of course no problem. Now what is really odd to me is that on boot up I can see the apple logo on all screens through the switch, after it has finally booted, the tv just goes black, but does not say no signal like it does if I unplug it from the switch.
I know That was long, but any help would be life saving. Thanks.
Any help on this matter would be greatly appreciated. I have an auditorium like setup with two projectors on each side of a stage. At the back of the room I have two smaller rooms that cannot fully see the projectors, so we installed TVs as monitors. Now at the control panel there is an HDMI switch that has the apple TV as the input and then the two outputs are both splitters. One splitter feeds both projectors, the other feeds the tv screens.
The problem I am having is that when powered up I can see the ATV on the projectors, but not the tv screens. No matter how I work it the tv screen never works with the apple tv through the switch. If I plug the tv screens directly into the apple tv of course no problem. Now what is really odd to me is that on boot up I can see the apple logo on all screens through the switch, after it has finally booted, the tv just goes black, but does not say no signal like it does if I unplug it from the switch.
I know That was long, but any help would be life saving. Thanks.