Bose QC 35 and Mojave..

Discussion in 'macOS Mojave (10.14)' started by Raekwonthachef, Sep 26, 2018.

  1. Raekwonthachef macrumors newbie

    Joined:
    Sep 26, 2018
    #1
    Hey Lads

    Just wondering, have anyone else had any problems with connecting their Bose QC35's with your mac, after updating to Mojave?

    The headset is visible under bluetooth, and it pairs with no problems. But shortly after it will disconnect by itself.

    Anybody experiencing the same?

    Thanks
     
  2. KGB7 Suspended

    KGB7

    Joined:
    Jun 15, 2017
    Location:
    Rockville, MD
    #2
    Have you checked for latest firmware for your qc35 headset?
     
  3. Raekwonthachef thread starter macrumors newbie

    Joined:
    Sep 26, 2018
    #3
    Yes, the Bose Connect app says the headset is updated.
     
  4. flur macrumors 68020

    flur

    Joined:
    Nov 12, 2012
    #4
    I'm not having this issue. Maybe unpair and repair?
     
  5. Raekwonthachef thread starter macrumors newbie

    Joined:
    Sep 26, 2018
    #5
    Hmm okay, since your not having it, it might be a problem with my pair..
    And yes, tried that as well.

    thanks for you reply!
     
  6. cmhsam macrumors 6502

    Joined:
    Jul 14, 2008
    #6
    Had the same issues with High Sierra as well. Seems that even though the QC35 can pair with two devices it only outputs audio to the first device in the chain.

    For example - when having my Macbook paired and my Iphone it would only output audio to one of the devices regardless which device was active. If my Mbpro was setup as the "first device" and it was in sleep mode it would not output to the Iphone until i went into the app and turned off the Mbpro.
     
  7. flur macrumors 68020

    flur

    Joined:
    Nov 12, 2012
    #7
    I haven't had this issue either, and I have two sets of Bose headphones (the QC35s and the soundsports). FWIW, I always make my phone the first device, as I have the app on my phone. I don't know if that will help, but it might. The app is pretty buggy.
     
  8. Donnacha macrumors regular

    Joined:
    Oct 17, 2006
    #8
    I have exactly the same problem, have wasted hours trying to fix it, my expensive Bose headphones are now completely useless to me.
     
  9. dawindblowz macrumors newbie

    dawindblowz

    Joined:
    Oct 23, 2018
    #9
    I can connect my QC-35, but my Bose Link speaker disconnect about 15 second after being connected.
     
  10. Significant1 macrumors 6502a

    Joined:
    Dec 20, 2014
    #10
    I have experienced that. But also on High Sierra. My solution is to use the app on my phone to connect. Which I then have to make connect too.

    Must say that I don't quite see the ability to connect to two devices as an advantage. Just too must of a hassle. Maybe if I was always using the same two devices.

    My Sonys is simpler in that regard. Pairing from the headset always work without needing fiddle with an app on my phone. Same goes with toggling Noise canceling.
     
  11. Euxtonian macrumors newbie

    Joined:
    Oct 26, 2018
    #11
    Fixed the same problem by downloading Bose QC35 2 software version 3.1.8 to headphones from Bose updater centre: http://btu.bose.com/?p=-1#section=connect

    QC35 2 is now connecting OK again, automatically connecting to multiple paired devices (iMac, iPhone, iPad, Alexa) and also now appearing again as output device in iMac system preferences sound devices list (the headphone were not showing on the list following Mojave install until the Bose software update).

    Hope this helps and works for you too.
     

Share This Page

10 September 26, 2018