Can't get info DFU mode

Discussion in 'Jailbreaks and iOS Hacks' started by JrFreak, Jun 25, 2010.

Most Liked Posts
  1. JrFreak, Jun 25, 2010

    JrFreak macrumors 6502a

    JrFreak

    Joined:
    Aug 3, 2009
    #1
    I've tried to hold down both buttons for 10 secs, 9 secs, 8 and 7 secs (before releasing the lock button)... with no luck. At about 9 secs the unlock disappears and the screen goes blank, but every time the apple logo still appears and the phone gets stuck there.

    Any ideas?

    JB 3.0.1, 4.28.08
     
    share
    + Quote Reply
  2. Bl0ckHe1d, Jun 25, 2010

    Bl0ckHe1d macrumors 6502

    Bl0ckHe1d

    Joined:
    Nov 19, 2009
    Location:
    Caledonia
    #2
    try this!!

    1. Ensure that the iDevice is switch on then plug it into your PC/Mac

    2. Switch off the iDevice (once sync is finished etc!)

    3. Once the iDevice is switched off, press and hold in the power button only (the top right hand button) for 3 secs.

    4. Without releasing the power button, press and hold in the home button (lower middle button!) for 10secs.

    5. Release only the power button and continue to hold the home button for approx 10-20secs.

    6. you should be in DFU mode :)

    There is a tutorial on the iclarified website!
     
    share
    + Quote Reply
  3. pixelated, Jun 25, 2010

    pixelated macrumors 6502a

    pixelated

    Joined:
    Oct 21, 2008
    #3
    Is the 'unlock' the lockscreen? if so...you start the process with the iPhone plugged in & off.
    You are describing a hard reset.
     
    share
    + Quote Reply
  4. JrFreak, Jun 25, 2010

    JrFreak thread starter macrumors 6502a

    JrFreak

    Joined:
    Aug 3, 2009
    #4
    Oh.. the phone needs to be off? Haha... hello DFU mode.:)
     
    share
    + Quote Reply
(You must log in or sign up to post here.)

Share This Page