Computer restarts when waken from sleep _ just installed two brand new PNY ram module

Discussion in 'MacBook Pro' started by sportguy0913, Oct 31, 2012.

  1. sportguy0913 macrumors 6502

    Jul 8, 2008
    Mid 2010 MBP 2.4ghz; replaced two 2gb samsung ram modules (original modules from apple) with two 4gb PNY brand new modules. Computer runs laggy, boots fine; when waken from sleep mode, freezes, restarts, gives the following message:

    "Your computer restarted because of a problem. Press a key or wait a few seconds to continue starting up."

    Upon boot, gives an error with the following details:

    Interval Since Last Panic Report: 290410 sec
    Panics Since Last Report: 7
    Anonymous UUID: 66F65C50-F07E-37E7-7E2A-9CDA18817384

    Wed Oct 31 20:24:10 2012
    panic(cpu 0 caller 0xffffff801b0a1b3a): "pmap_pv_remove(0xffffff80307a5e00,0x7f9f10856000,0x79d, 0x79db80, 0xffffff81033ebcc4, 0xffffff81033ebcb8): null pv_list!"@/SourceCache/xnu/xnu-2050.18.24/osfmk/i386/pmap_internal.h:753
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81033ebb50 : 0xffffff801b01d626
    0xffffff81033ebbc0 : 0xffffff801b0a1b3a
    0xffffff81033ebcf0 : 0xffffff801b061693
    0xffffff81033ebdb0 : 0xffffff801b062abb
    0xffffff81033ebf40 : 0xffffff801b0b7fa9
    0xffffff81033ebfb0 : 0xffffff801b0ce411

    BSD process name corresponding to current thread: AirPlayUIAgent

    Mac OS version:

    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide: 0x000000001ae00000
    Kernel text base: 0xffffff801b000000
    System model name: MacBookPro7,1 (Mac-F222BEC8)

    System uptime in nanoseconds: 295198552546
    last loaded kext at 41686483209: 1.9.5d0 (addr 0xffffff7f9d3ae000, size 36864)
    loaded kexts: 1.9.5d0 3.10 1.60 1.0.2d2 100.12.69 2.3.1f2 2.3.1f2 122 2.3.1f2 1.0.0d1 4.0.9f33 7.0.0 3.2.11 1.6.0 3.0 4.0.9f33 4.0.9f33 2.0.2d0 1.0.0 3.2.11 170.2.3 3.5.10 1.0.33 8.0.0 3.0.2d6 235.4 320.15 235.4 235.4 3.0.1
    Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.62f6
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0000, 0x344742445341554244424120202020202020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0000, 0x344742445341554244424120202020202020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (
    Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
    Serial ATA Device: HL-DT-ST DVDRW GS23N
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2

    Faulty RAM? Everything is laggy when computer is running. (I'm typing from it right now).


    Worth noting: I reset PRAM and SMC already.. still issues.
  2. T5BRICK macrumors G3


    Aug 3, 2006
    If you put your old RAM back in, does the problem go away?
  3. xekret macrumors newbie

    Sep 3, 2012
    I installed some PNY RAM on my iMac and it was nothing but problems. I would re-install the old ram and everything was fine. Turns out the RAM sticks were bad. Run some tests with Render and see what it finds. GL.

Share This Page