:confused: Kernel Panics

Discussion in 'Mac Basics and Help' started by xcapepr, Feb 27, 2008.

  1. xcapepr macrumors newbie

    xcapepr

    Joined:
    Jan 8, 2008
    Location:
    San Juan, Puerto Rico
    #1
    Hello, I have a newish MBP Memron with a somewhat fresh install of Leopard.

    I have gotten several Kernel Panics in a short time (under a month).

    Anyway, I don't know whats causing it but I'm going to post the report of the last one:

    Code:
    Wed Feb 27 17:23:43 2008
    panic(cpu 0 caller 0x001A8C8A): Kernel trap at 0x00383f86, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00000008, CR3: 0x01455000, CR4: 0x00002660
    EAX: 0x00000000, EBX: 0x00000000, ECX: 0x5702f828, EDX: 0x00000000
    CR2: 0x00000008, EBP: 0x6826bc38, ESI: 0x00000000, EDI: 0x00000001
    EFL: 0x00010246, EIP: 0x00383f86, CS:  0x00000008, DS:  0x00000010
    Error code: 0x00000000
    
    Backtrace, Format - Frame : Return Address (4 potential args on stack) 
    0x6826ba58 : 0x12b0e1 (0x457024 0x6826ba8c 0x13321a 0x0) 
    0x6826baa8 : 0x1a8c8a (0x460550 0x383f86 0xe 0x45fd00) 
    0x6826bb88 : 0x19eb67 (0x6826bba0 0x57042a00 0x6826bc38 0x383f86) 
    0x6826bb98 : 0x383f86 (0xe 0x48 0x10 0x10) 
    0x6826bc38 : 0x9659c8 (0x0 0x6826be9c 0x6826bc88 0x214dd8) 
    0x6826bc78 : 0x23a9e6 (0x722d000 0x57010100 0x1 0x1) 
    0x6826bcb8 : 0x23c822 (0x57010100 0x14 0x1 0x0) 
    0x6826bdd8 : 0x23c85e (0x57010100 0x0 0x6826be48 0x136784) 
    0x6826bdf8 : 0x2287b6 (0x2 0x57010100 0x723fa14 0x0) 
    0x6826be38 : 0x2177c5 (0x2 0x57010100 0x6826be88 0x136997) 
    0x6826bec8 : 0x213f04 (0x7411c04 0x2 0x57010100 0x3e74fc) 
    0x6826bef8 : 0x21465d (0x5248e4 0x7125e48 0x5702f81a 0x6826bf4c) 
    0x6826bf68 : 0x2148bb (0x0 0x57010100 0x0 0x723fa2c) 
    0x6826bfc8 : 0x19e93c (0x723fa04 0x0 0x1a20b5 0x6bb8128) 
    Backtrace terminated-invalid frame pointer 0
          Kernel loadable modules in backtrace (with dependencies):
             com.parallels.kext.Pvsnet(3.0)@0x962000->0x967fff
    
    BSD process name corresponding to current thread: kernel_task
    
    Mac OS version:
    9C31
    
    Kernel version:
    Darwin Kernel Version 9.2.0: Tue Feb  5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)
    
    I hope someone can make some sense out of it. I have installed smCFan control, Logmein, Labtick, Parallels, Speed Downloader 5, Folder Teint, LastFM. I could do n archive reinstall but I would lke to know whats causing them problem beforehand... any help appreciated!

    The system configuration just in case:

    Code:
    Model: MacBookPro3,1, BootROM MBP31.0070.B02, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB
    Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplays_pcie_device, 128 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x87), 1.3.2
    Bluetooth: Version 2.1.0f14, 2 service, 0 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Network Service: Parallels Host-Guest, Ethernet, en2
    Network Service: Parallels NAT, Ethernet, en3
    PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
    Serial ATA Device: WDC WD2500BEVS-60UST0, 232.89 GB
    Parallel ATA Device: HL-DT-ST DVDRW  GSA-S10N
    USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
    USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA
    USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
    
     
  2. Eidorian macrumors Penryn

    Eidorian

    Joined:
    Mar 23, 2005
    Location:
    Indianapolis
    #2
    I'm going to take a guess and say it's Parallels 3.0.

    Have you tried reinstalling it? When does it happen?
     
  3. xcapepr thread starter macrumors newbie

    xcapepr

    Joined:
    Jan 8, 2008
    Location:
    San Juan, Puerto Rico
    #3
    Last time it happened I was running Parallels with XP in coherence mode
     
  4. Eidorian macrumors Penryn

    Eidorian

    Joined:
    Mar 23, 2005
    Location:
    Indianapolis
    #4
    I was hoping someone else would reply first but it looks like you're waiting for an answer.

    kernel_task had some bad mojo trying to use the Parallels kernel extension and it panicked.

    I suggest trying to reinstall Parallels 3.0 using the latest version available. You can get it from here. Get back to me if that doesn't work.
     

Share This Page