Cuff bracelet for space grey with matching hardware?

[x-evil-x]

Is there a black cuff style bracelet for space grey with either black or grey hardware? I can't seem to find anything besides the 100$+ customs around.

 

[x-evil-x]

Anyone?

 

[Macaddict16]

I just bought a $30 black cuff off Amazon and swapped out the links with a set of Space Grey adapters. The buckle underneath doesn't match though.

 

[x-evil-x]

I've tried a few of those on amazon. I can't get past the cuff part being half your wrist. Looks horrible from the bottom angle. Little picky id like a 6.5" cuff to match my whole wrist.

 

[Macaddict16]

I've tried a few of those on amazon. I can't get past the cuff part being half your wrist. Looks horrible from the bottom angle. Little picky id like a 6.5" cuff to match my whole wrist.

What kind of full cuff are you thinking of? I'm intrigued

 

[x-evil-x]

https://www.etsy.com/listing/249713729/venture-black-tailored-fit-apple-watch?ref=hp_rv
Basically on the underside i want the cuff to be tailor fit or close to touching. Just seems off to me having it end with that much gap.
Not going to pay 175$ for a watch band haha. Ill end up making one
best view i can get of it. iap_640x640.967296480_13ms77kj.jpg

 

[Macaddict16]

https://www.etsy.com/listing/249713729/venture-black-tailored-fit-apple-watch?ref=hp_rv
Basically on the underside i want the cuff to be tailor fit or close to touching. Just seems off to me having it end with that much gap.
Not going to pay 175$ for a watch band haha. Ill end up making one
best view i can get of it. iap_640x640.967296480_13ms77kj.jpg

That does look nice! $175 is super steep though... Haha

 

[x-evil-x]

Ended up ordering this and another similar 1.5" width full band. Im going to take it to a jewelry shop and have them cut out the hr sensor area. Probably have to modify the adapter/strap pieces to fit too. Little project but i think ill be happy with the outcome.
https://www.amazon.com/gp/product/B0048NHFMQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

 

[Macaddict16]

Ended up ordering this and another similar 1.5" width full band. Im going to take it to a jewelry shop and have them cut out the hr sensor area. Probably have to modify the adapter/strap pieces to fit too. Little project but i think ill be happy with the outcome.
https://www.amazon.com/gp/product/B0048NHFMQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Nice! Make sure you share pics when you get it all set up! Good luck!

 

[x-evil-x]

i shall. Might end up changing out the rivets for nicer ones depending things.

 

[x-evil-x]

Here's how it went. Cut out the hole with a circle saw thing whatever it's called. Used a lighter on the edges on the cut. Then some leather dye and some glue sealant around the inside after. Came out pretty good I think. Heart rate censor works good. Watch sits pretty flush with the band.
[doublepost=1475382682][/doublepost]The band flipped around the other way on the bottom pic.

 

[Macaddict16]

Here's how it went. Cut out the hole with a circle saw thing whatever it's called. Used a lighter on the edges on the cut. Then some leather dye and some glue sealant around the inside after. Came out pretty good I think. Heart rate censor works good. Watch sits pretty flush with the band.
[doublepost=1475382682][/doublepost]The band flipped around the other way on the bottom pic.

Nice! That looks really good!

 

[x-evil-x]

Nice! That looks really good!

thanks came out good. i liked the band being about the same width of the watch too. super wide cuffs make my already small wrists look funny.