D-Link router setup problem

Discussion in 'Mac Accessories' started by newman330, Jul 3, 2011.

Most Liked Posts
  1. newman330, Jul 3, 2011

    newman330 macrumors newbie

    Joined:
    Jul 3, 2011
    #1
    I just bought a new D-Link DIR-605 (I'm in China, so I'm sure this model has a corresponding model in US / Europe... Maybe 615??)

    My connectivity without the modem is fine. When I connect through the router, and try to access the web setup page (192.168.0.1), I get nothing. So, I read the US manual for the 615 (the 605 manual is all chinese) and it says that I must ensure that the iMac IP subnet is also 192.168.0.1. Under TCP/IP, I have setup manually with 192.168.0.50 for IPv4 address, 255.255.255.0 for subnet and 192.168.0.1 for router and still I get nothing when I put http://192.168.0.1. I even put 192.168.0.1 into the dns server as well. Everything I try is a bust.

    The internet I have here is ADSL I think (it is coming in via phone line but everyone keeps calling it broadband). The connection type is PPPoE.

    Kinda desperate here, so really would appreciate some assistance.
     
    share
    + Quote Reply
  2. newman330, Jul 3, 2011

    newman330 thread starter macrumors newbie

    Joined:
    Jul 3, 2011
    #2
    Anybody? Really could use a hand here.
     
    share
    + Quote Reply
  3. miles01110, Jul 3, 2011

    miles01110 macrumors Core

    miles01110

    Joined:
    Jul 24, 2006
    Location:
    The Ivory Tower (I'm not coming down)
    #3
    Do you have the connection (I assume it's an ethernet cable) from the modem to the router going to the right port? Have you tried resetting the router to factory defaults (usually holding the power button for 30 seconds or so)? Does your ISP allow for private networks? Can you ping 192.168.0.1?

     
    share
    + Quote Reply
(You must log in or sign up to post here.)

Share This Page