Display Bezel on MacBook

Discussion in 'MacBook' started by M.a.r.k., Feb 27, 2009.

  1. M.a.r.k. macrumors member

    Joined:
    Oct 15, 2007
    #1
    Hey,

    I recently replaced my display on my macbook, and everything went fine, except some "Little" problems with the hince cover, that i overcame eventually;
    But the problem i'm facing now is the freakin display bezel it won't snap back on everywhere.
    there are this tiny things (see picture) which won't fit back into their place.
    Is there a trick on how to make them? :)

    thanks

    [​IMG]
     
  2. Skeletal-dæmon macrumors 6502

    Joined:
    Apr 27, 2008
    #2
    Here's what you do:

    You take each and every one and carefully pry them off individually and slot them (you may need to flex them slightly) into their respective slots. The Bezel will then click straight back in, and I strongly advise that when re-sitting the bezel you start at the bottom with the large clips, then work your way up.

    I had pulled my screen apart to mod the Apple colour, and everything had gone fine right up until I had to put the bezel on and I was there for a good twenty minutes before I figured this one out. Good luck!
     
  3. Foxglove9 macrumors 65816

    Foxglove9

    Joined:
    Jan 14, 2006
    Location:
    New York City
    #3
    Anyone know where to find replacement clips? Or would I just have to buy a new bezel (assuming they come attached to it?)
     

Share This Page