First problem with mbp

Discussion in 'MacBook Pro' started by cool11, May 19, 2007.

  1. cool11 macrumors 65816


    Sep 3, 2006
    I have my mbp 4 months. I am new to the mac world. I did not had any problems since I bought it.
    Today I faced the first one.

    I used it as always when a message displayed(I tried to open parallels). The meaning was that I should restart the mbp because of a problem and I should press the power button.
    I did it.
    When I started my mbp again, I saw the log file.

    I cannot understand it so I post it here:

    panic(cpu 1 caller 0x001A429B): Unresolved kernel trap (CPU 1, Type 27=Unknown), registers:
    CR0: 0x8001003b, CR2: 0x3c0f2000, CR3: 0x00e3c000, CR4: 0x000006e0
    EAX: 0x0000000a, EBX: 0x6d626572, ECX: 0x00000000, EDX: 0x01076818
    CR2: 0x3c0f2000, EBP: 0x252c3b18, ESI: 0x6d616769, EDI: 0x63216e75
    EFL: 0x00000246, EIP: 0x3c0f2001, CS: 0x00000008, DS: 0x3d230010

    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x252c3908 : 0x128d08 (0x3cb134 0x252c392c 0x131de5 0x0)
    0x252c3948 : 0x1a429b (0x3d0e4c 0x1 0x1b 0x3ca5fc)
    0x252c3a58 : 0x19ada4 (0x252c3a70 0x252c0048 0x252c0010 0x190010)
    0x252c3b18 : 0x96710a (0x4380f18 0x0 0x4380f04 0x16c)
    0x252c3bd8 : 0x967862 (0x4380f04 0x252c3eb8 0x18 0x0)
    0x252c3d38 : 0x9648c7 (0x4380f04 0xc0185401 0x252c3eb8 0x6)
    0x252c3d68 : 0x1f05d7 (0xd000000 0xc0185401 0x252c3eb8 0x81)
    0x252c3da8 : 0x1e7411 (0x252c3dd0 0x297 0x252c3e08 0x408e5dc)
    0x252c3e08 : 0x1df212 (0x4613318 0xc0185401 0x252c3eb8 0x81)
    0x252c3e58 : 0x331c4c (0x454ddf0 0xc0185401 0x252c3eb8 0x408e5dc)
    0x252c3e88 : 0x34ffa8 (0x454ddf0 0xc0185401 0x252c3eb8 0x408e5dc)
    0x252c3f58 : 0x379e23 (0x408e5dc 0x4585e70 0x4585eb4 0x0)
    0x252c3fc8 : 0x19b17e (0x4578e60 0x0 0x10 0x0) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbfffe5e8
    Kernel loadable modules in backtrace (with dependencies):

    Kernel version:
    Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386

    Model: MacBookPro2,2, BootROM MBP22.00A5.B01, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB
    Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 128 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
    AirPort: AirPort Extreme, 1.0.47
    Bluetooth: Version 1.7.14f14, 2 service, 0 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    Network Service: Parallels Host-Guest, Ethernet, en2
    Network Service: Parallels NAT, Ethernet, en3
    Serial ATA Device: Hitachi HTS541616J9SA00, 149.05 GB
    Parallel ATA Device: HL-DT-ST DVDRW GWA4080MA
    USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
    USB Device: USB2.0 Hub Controller, NEC Corporation, Up to 480 Mb/sec, 500 mA
    USB Device: USB Receiver, Logitech, Up to 1.5 Mb/sec, 500 mA
    USB Device: iP4000, Canon, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
    USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA

    Is it a problem of parallels? Is it a software or hardware problem? I think I have apple memory modules and I take care of my mbp.
    What is going on?
  2. swiftaw macrumors 603


    Jan 31, 2005
    Omaha, NE, USA
    For some reason Parallels will occasionally cause a kernel panic when you launch it. Providing it doesn't happen every time I wouldn't worry about it.

    Also, you should check to see if you have the latest version of Parallels
  3. cool11 thread starter macrumors 65816


    Sep 3, 2006
    Yesterday, while I was working in my mbp(nothing special-just web surfing), suddenly it froze! I had to press the power button and boot again.
    How can I see what happened?
    Something like an system event viewer?
  4. deadpixels macrumors 6502a


    Oct 30, 2006

Share This Page