Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

djibouti13

macrumors newbie
Original poster
Good evening!
So i recently received a Mac pro 1.1 (completely stock btw) and I decided to download El Capitan on it,since it is the latest version of Mac OS on this device.I used the .dmg file provided by Hrutkay Mods on Youtube.The issue is that after a short while the system just crashes and restarts.Any help would be appreciated.
 
The official max macOS for a MacPro 1,1 is 10.7.5 (Lion).

Use Mist to download the latest Apple installer of your choice. Set up another drive or partition, and do a clean install using the official installer. We don't know what tweaks are in the DMG that you used. Or if it was prepared for a different Mac model.

You may need to follow Apple's instructions to turn an installer into bootable media. If you're running an unofficial ElCap install, the Lion installer will refuse to open. Apple blocks you from installing earlier versions from within later versions.

If shutdowns persist, we'll want the kernel panic log, or any other messages provided about the cause. But first get a supported installation, to limit the possible variables.
 
Last edited:
  • Like
Reactions: MarkC426
Good evening!
So i recently received a Mac pro 1.1 (completely stock btw) and I decided to download El Capitan on it,since it is the latest version of Mac OS on this device.I used the .dmg file provided by Hrutkay Mods on Youtube.The issue is that after a short while the system just crashes and restarts.Any help would be appreciated.
I can answer that... the boot.efi has a bug in it that was never fixed. ALL RAM modules must be 2GB in size or bigger otherwise the system will crash. I actually did a video on that in the Mac Pro Series also 😛 So if you have 512MB and or 1GB modules in the system, remove them it'll stop crashing
 
  • Like
Reactions: MarkC426 and BanFoy
I can answer that... the boot.efi has a bug in it that was never fixed. ALL RAM modules must be 2GB in size or bigger otherwise the system will crash. I actually did a video on that in the Mac Pro Series also 😛 So if you have 512MB and or 1GB modules in the system, remove them it'll stop crashing
Thanks for the reply.I will make sure to get my hands on some larger modules and i will let you know whether this worked.
 
I can answer that... the boot.efi has a bug in it that was never fixed. ALL RAM modules must be 2GB in size or bigger otherwise the system will crash. I actually did a video on that in the Mac Pro Series also 😛 So if you have 512MB and or 1GB modules in the system, remove them it'll stop crashing
Do you know whether Maverics or Yosemite are affected by this bug?
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.