G4 Booting Problems.... :(

Discussion in 'Macintosh Computers' started by Firebar, Nov 16, 2005.

  1. Firebar macrumors member

    Nov 16, 2005
    Hi everyone,

    Just upgraded a PowerMac G4 Dual 450Mhz machine to OS X 10.4 (from OS 9). The hard drive was originally partitioned in 2, but has since been totally wiped and is just a single volume now. Unfortunately when rebooting or starting up the machine, it goes straight into the OpenFirmware and I have to type in mac-boot - it then loads up OS X fine.

    I've tried all of the following;

    /dev options .properties in OpenFirmware and setting the auto-boot? to true.

    /dev options .properties and setting it to use nvram

    reset-all to clear the nvram.

    I've opened it up and reset the nvram that way.

    I'm totally out of idea's and dont have a clue what to do. Any help would be appreciated.

    Something to perhaps note is that the machine never switches itself off, everything powers down but the light stays on at the front. The power for a monitor is being daisy chained from the PSU.
  2. Lacero macrumors 604


    Jan 20, 2005
    Some things to try. First of all, unplug your computer and press the little black button on the motherboard. Re-seat the RAM or switch them around.

    Second, do a wipe of the HD and re-install Tiger.

    After those steps, reset the PRAM while booting up.

Share This Page