Has the PixelSpec HD been redesigned yet for 4S?

Discussion in 'iPhone Accessories' started by jamesryanbell, Oct 19, 2011.

  1. jamesryanbell macrumors 68020

    jamesryanbell

    Joined:
    Mar 17, 2009
    #1
    I picked up an iPhone 4S today, and my iPhone 4 case didn't fit because - as I'm sure you know - Apple adjusted the position of the mute switch. I can't use it. Does anyone know if there is a 4S specific version? All the sites say "fits 4 and 4S", but I'm not sure that's accurate since mine doesn't fit.

    Thanks in advance for any help. :)
     
  2. asleep macrumors 68040

    asleep

    Joined:
    Sep 26, 2007
    #2
    Yes, here are the comparison shots:

    4S with Power Support Crystal Film vs 4 with 3M Carbon Di-Noc on back
    [​IMG]
    Speck should have dropped the top of the Mute switch hole down to cover that antenna gap on the 4S (top).
    [​IMG]
    I do have some film bubbling issues around the enlarged camera/flash hole on the 4S case.
    [​IMG]

    Texture, feel, pliability of the material is exactly the same as the iPhone 4/AT&T case from 16 months ago. Button action is as good as ever.

    I'd suggest Speck do some minor design adjustments: 1) extend the edge of the camera/flash hole away from so close to the side of the phone, and 2) lower the top of the Mute Switch hole to cover that antenna gap.
     
  3. Degree macrumors newbie

    Joined:
    Oct 18, 2011
    #3
    :S The only thing turning me down on buying the case is the mute switch
     
  4. jamesryanbell thread starter macrumors 68020

    jamesryanbell

    Joined:
    Mar 17, 2009
    #4
    How do know which cases have been redesigned? Do all of the ones that say 4/4S work for both?
     
  5. NWI73 macrumors 6502a

    Joined:
    Jun 22, 2010
    #5
    Anyone with a 4S compatible version wanna trade for mine which only fits the 4? PM me :)
     
  6. andyx3x macrumors 65816

    Joined:
    Mar 1, 2011
    #6
    The cases made for the Verizon iPhone fit the 4S. That's what I'm using.

    God, the new camera cutout is huge. I don't think I could deal with that.
     
  7. jamesryanbell thread starter macrumors 68020

    jamesryanbell

    Joined:
    Mar 17, 2009
    #7
    I don't mean this rudely, but what does it matter? The camera cut out is a little larger....so what? It's still a very tiny space that's exposed, and the case is still top notch. Ya know?
     
  8. andyx3x macrumors 65816

    Joined:
    Mar 1, 2011
    #8
    IMO, it just looks tacky. The camera cutout doesn't need to be that big. I have the old camera cutout and it works just fine.
     
  9. jamesryanbell thread starter macrumors 68020

    jamesryanbell

    Joined:
    Mar 17, 2009
    #9
    Well, it doesn't look like they make that case with the old camera cutout.

    I'm willing to sacrifice it though for the quality of the case itself.
     

Share This Page