Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

PTVMan

macrumors 65816
Original poster
Sep 20, 2012
1,079
595
I get the Tracking Failed message box and it says to turn on Travel Mode to stabilize visuals. But I can't get my eye tracking to stabilize long enough to select Turn on Travel Mode. Any suggestions?
 
  • Like
Reactions: HDFan
You need to place VP in Travel Mode before plane begins to move. Not sure if that is your case or not.
You are absolutely correct! Fortunately, I was able to finally click Turn on Travel Mode. Otherwise, I think a user is screwed.
 
  • Like
Reactions: G5isAlive
Same experience. I feel like this is a solvable problem using an accessibility feature like triple-click capture button or Digital Crown, or a Shortcut triggered by a focus mode. Auto-detect should be possible when it detects you’re moving 500 mph. Imagine a pop-up “Seems like you’re flying in a plane. Enable Travel Mode?” - you rotate the Digital Crown to select Yes or No, then press to confirm.
 
Last edited:
Same experience. I feel like this is a solvable problem using an accessibility feature like triple-click capture button or Digital Crown. Auto-detect should be possible when it detects you’re moving 500 mph. Imagine a pop-up “Seems like you’re flying in a plane. Enable Travel Mode?” - you rotate the Digital Crown to select Yes or No, then press to confirm.
I agree that it would be better if the Travel Mode could be turned on by the Digital Crown. I got lucky finally by tapping.
 
  • Like
Reactions: G5isAlive
I've had the same problem and agree that clicking on the crown would be a great solution.
 
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.