Help: replaced screen -doesn't turn on

Discussion in 'iPhone Tips, Help and Troubleshooting' started by OrangeSVTguy, Sep 1, 2016.

  1. OrangeSVTguy macrumors 601

    OrangeSVTguy

    Joined:
    Sep 16, 2007
    Location:
    Northeastern Ohio
    #1
    Worked on an iPhone and replaced the screen, home button flex cable and front camera flex cable. Hooked everything back up and it's dead? I can't get it to turn on. Swapped the old screen back on and still nothing. Any ither ideas?
     
  2. ChrisWilliam macrumors member

    ChrisWilliam

    Joined:
    Jan 20, 2016
    Location:
    UK
    #2
    You do it by yourself? You can go to app support to make sure that you'are well assembly your screen. if not be the problem of the assemblement, then must be the problem of the screen.
     
  3. Willo34 macrumors regular

    Willo34

    Joined:
    Feb 5, 2015
    Location:
    Netherlands
  4. OrangeSVTguy thread starter macrumors 601

    OrangeSVTguy

    Joined:
    Sep 16, 2007
    Location:
    Northeastern Ohio
    #4
    iPhone 6. Small crack on the screen so I wanted to switch it. She dropped it too which somehow broke 2 of the flex cables which I also replaced, the crack wasn't a result of the drop. The 2 flex cables was the one for the home button and the speaker/front camera.

    I guess I can try and remove all the cables and just hook the original screen back up and see if it turns on.
    --- Post Merged, Sep 13, 2016 ---
    I get nothing from hitting the home button or doing a hard reset. Plugging in the charger gets no reaction either.
     

Share This Page