How to setup a Wired and Wireless home network

Discussion in 'Mac Basics and Help' started by wana1, Nov 10, 2008.

  1. wana1 macrumors newbie

    Joined:
    Nov 10, 2008
    #1
    I have an iMac and a e-Mac connected by a switch which is connected to a DSL modem to access the Internet, they must be communicated to each other in a wired network to run in "multi-user" mode the "Account Edge-MYOB" application installed in both computers because it doesn't work well in a wireless network.. Now I also have two MacBook requiring wireless access to the internet and two USB connected printers that need to be shared by all four computers. I need to know which is the best way to setup my small network using my DSL Modem, a Switch and an Airport Extreme.
    Thanks
     
  2. Verschoren macrumors regular

    Verschoren

    Joined:
    Apr 1, 2005
    Location:
    Antwerp, Belgium
    #2
    Connected your Airport Extreme to the modem via ethernet

    Connect both computers via ethernet to the Airport Extreme
    Configure the wireless network with the Airport Configuration Assistant
    Setup the created network on the MacBooks

    For printing:
    Connect the printers to one or more wired computers, and turn on printer sharing. At them on all the other computers.

    Or, but not sure if it works:
    Buy a USB-hub with 2 or more ports
    connect both printers to the hub and the hub to the Airport Extreme
    configure printer sharing in the Airport Extreme

    finished ;-)
     

Share This Page