I can't get the imac ram cover door open...

Discussion in 'iMac' started by gotanimac, Sep 3, 2010.

  1. gotanimac macrumors member

    Joined:
    Aug 24, 2010
    #1
    one of the screws on the ram cover of my new 2010 imac won't come out... any ideas? the others did real easy but this one won't budge, i think the it's stripped. i finally just ripped out part of the ram cover so that one screw (very left) is broke off from the rest of the cover since the other screws came out fine..

    it's not noticeable but it's upsetting me. i assume the screw is stripped, any ideas?
     
  2. mulo macrumors 68020

    mulo

    Joined:
    Aug 22, 2010
    Location:
    Behind you
  3. gotanimac thread starter macrumors member

    Joined:
    Aug 24, 2010
    #3
    i drilled into the old screw in attempt to remove, it's still stuck up there and i only got the head of the screw off, the body remains in the hole. what a pain in the ass..
     
  4. ias2010 macrumors newbie

    Joined:
    Aug 31, 2010
    Location:
    MI
    #4
    i almost got into the same situation, used a bit larger screw driver, thanks god i did not mess up the screw, it is real pain taking damaged screw out.
     

Share This Page