Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

LuckyOldMan

macrumors newbie
Original poster
Mar 22, 2018
28
42
Drielanden
Recently, certain functions on my iMac 18.3 have changed in a strange way.

1).
The iMac can no longer be turned off going through the Apple icon at the top left -> Turn off, but restarts instead.
The only thing that helps is a hard shutdown using the PWR button.

Turning off by using the selection menue on the logon-desktop (Turn off - Restart - Hibernate) only leads to a restart too.
Restarting via the menues - either Apple-icon or logon-desktop - works normally.

All attempts using NVRAM reset, SMC reset did not improve the situation.

2).
Installing macOS Ventura, Monterey etc. only goes up to the 2nd phase of the installation - after rebooting again, the macOS installer suddenly disappeared and is no longer displayed in the Apple picker via ALT. Only already installed/existing macOS were displayed.

Installing a new macOS on the iMac data storage device is only possible by using an external case and then connecting it to the iMac (USB-C).

Once installed the data storage back into the iMac, booting is possible without any problems.
But adding another macOS while the disk is installed again is still not possible.

Everything else works as usual.

Any advices, tips on how to solve the problems would be appreciated. Thanks.
 
What year was the iMac made?
What kind of drive is inside?
Did you ever add or replace RAM?
 
I'd be suspecting either the replaced drive or the added RAM.

You might take the 16gb DIMMs out for 2-3 days, see if that changes anything (only factory RAM installed).
 
Big upgrade 6/2023 from original FD (1TB HDD + 32GB Blade) to NVMe-SSD WD_Black SN770 & Sata-SSD WD Blue SA510.
Did you turn the two SSD into a Fusion Drive after install? If so, you’ll want to unwind that.
 
Waff is right.

Do a COMPLETE BACKUP.

Then, UNfuse the fusion drive.

It's possible that one of the blade SSDs has "gone wonky" on you.
 
Did you turn the two SSD into a Fusion Drive after install?
Yes - I did it, but only for testing purposes, not for long-term use. Simply to show that an NVMe SSD can also speed up a SATA SSD. ;)

The problems described have been solved: the iMac can be switched off normally again and macOS can be installed again.
The reasons were apparently incompatibility of the 2x 16GB RAM with the 2x 4GB RAM.
It worked perfectly for a year, but suddenly stopped.

Each RAM pair works on its own - whether 2x 4GB or 2x 16GB. I don't know yet why it is like this.

But it had nothing to do with the data storage devices - in whatever configuration. These part works fine - I just changed from the WD_Black SN770 to a SN850X - even better. :)

Thanks both of you for your input. :)
 
Last edited:
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.