Become a MacRumors Supporter for $50/year with no ads, ability to filter front page stories, and private forums.

snow755

macrumors 68000
Original poster
Sep 12, 2012
1,884
844
Yikes. i wounder has any noted the air gap with the new iMac? And it’s not Fully. Laminated to the screen like iPad Air and iPad Pro ?

all so the white border are not helping lol


 
You need to Relax I don’t need to stop doing anything this is my opinion on the new iMac
This was more a respond to all people who complain about the white border. 🙂
But still: Where did you see that air gap?
 
Screen Shot 2021-04-21 at 2.00.35 AM.png





the arrow point where I see the air gap
 
  • Angry
Reactions: calstanford
There won't be an air gap. Laminating is cheap enough that it more than warrants the reflectivity benefits that come with it on a £1000+ machine. Black space between the bezel and display doesn't mean airgaps...
 
There won't be an air gap. Laminating is cheap enough that it more than warrants the reflectivity benefits that come with it on a £1000+ machine. Black space between the bezel and display doesn't mean airgaps...
Do you, by chance, know why most LCD displays have a small black space between the display and the bezel? I was asking this myself since a pretty long time, but never found an answer. 🤔
 
Where do you see that air gap? Also stop acting like this is the first Mac display with a white/light-color border. We had it on the iMac G3, G4, G5, iBook, Powerbook and most people didn't care. 🤷‍♂️
And the pre-Retina MBA had silver bezels.
 
  • Like
Reactions: mcru21
Where do you see that air gap? Also stop acting like this is the first Mac display with a white/light-color border. We had it on the iMac G3, G4, G5, iBook, Powerbook and most people didn't care. 🤷‍♂️

But that was the same color of the chassis.

Do you, by chance, know why most LCD displays have a small black space between the display and the bezel? I was asking this myself since a pretty long time, but never found an answer. 🤔

An LCD display is made of different layers, the bezel is actually part of the structure to hold them together. I don't know if all of them can be glued, or perhaps they don't want to invest on it.
I guess they could have made the white border line perfectly with the pixels, but probably it was too expensive...
 
Do you, by chance, know why most LCD displays have a small black space between the display and the bezel? I was asking this myself since a pretty long time, but never found an answer. 🤔
1. Manufacturing tolerances
2. Stop the white border from interacting with the display picture edges when the user looks at the screen from an angle. (This would interrupt on a sub-pixel basis, which would cause lots of rainbow-like artifacting on the edges)
 
  • Like
Reactions: biffuz
1. Manufacturing tolerances

These are the words I was looking for, when I was trying to explain why the bezel don't line up with the pixels, thanks!

2. Stop the white border from interacting with the display picture edges when the user looks at the screen from an angle. (This would interrupt on a sub-pixel basis, which would cause lots of rainbow-like artifacting on the edges)

That's also a very good point!

Also, the white of the bezel would almost never match the white on the display, since you can change the color temperature, luminosity, contrast, and calibration, so a separation is necessary.
 
  • Like
Reactions: Jamalien
Register on MacRumors! This sidebar will go away, and you'll see fewer ads.