iMac G5 20" testing --updated--

Discussion in 'PowerPC Macs' started by Zeke D, Jul 22, 2012.

  1. Zeke D, Jul 22, 2012
    Last edited: Jul 22, 2012

    Zeke D macrumors 6502a

    Zeke D

    Joined:
    Nov 18, 2011
    Location:
    Arizona
    #1
    I've gotten a few PMs about the parts I need to get the iMac running. I wired up an atx psu to power the unit. I get the chime and three diagnostic LEDs. No backlight on the paner, but that could be because I only have 12v instead of 24v. It looks as if the same VGA adapter that goes to the eMac will work on the iMac. I should be able to get monitor output and at least boot an install DVD right?
     
  2. Zeke D thread starter macrumors 6502a

    Zeke D

    Joined:
    Nov 18, 2011
    Location:
    Arizona
    #2
    It's been a day or two so I will bump this for zen.
     
  3. Macman756 macrumors 6502a

    Macman756

    Joined:
    Sep 24, 2008
    Location:
    Atlanta, GA
    #3
    You need an iMac G5 PSU with proper pinout and wattage
     

Share This Page