Install BOOTCAMP RAID 0 in ACHI mode using PCIe Controller

Discussion in 'Windows, Linux & Others on the Mac' started by mac-hacks, Feb 21, 2011.

  1. mac-hacks, Feb 21, 2011
    Last edited: Feb 21, 2011
  2. balamw Moderator

    balamw

    Staff Member

    Joined:
    Aug 16, 2005
    Location:
    New England
    #2
  3. mac-hacks, Feb 21, 2011
    Last edited: Feb 21, 2011

    mac-hacks thread starter macrumors regular

    Joined:
    Jan 14, 2011
    Location:
    Swimming In Tsunami
  4. mac-hacks, Feb 21, 2011
    Last edited: Feb 21, 2011

    mac-hacks thread starter macrumors regular

    Joined:
    Jan 14, 2011
    Location:
    Swimming In Tsunami
    #4
    Update

    I needed to recondition my SSD drives and do clean install and remember key element that i left off.

    You need to use iPartition "Write MBR BOOT Code" after you add System Reserve & repartition drive. It tricks W7 installer to write to GPT. I also check "Visible in Windows" using inspector feature with iPartition. iPartition screens shots below to reference.

    http://dl.dropbox.com/u/17847085/Blog/Screen%20shot%202011-01-29%20at%203.19.23%20PM.jpg

    http://dl.dropbox.com/u/17847085/Blog/Screen%20shot%202011-01-29%20at%203.19.02%20PM.jpg
     

Share This Page