Installing 3 pin Airport card in early 2009 Mac Pro

Discussion in 'Mac Pro' started by marketis12, Sep 24, 2013.

  1. marketis12 macrumors newbie

    Joined:
    Sep 23, 2013
    #1
    Help me please. I have just installed an airport card into my early 2009 Mac Pro as it was cheaper than installing ethernet to where my computer is. It IS working but has poor reception. The airport card i purchased has 3 pins labelled 0,1 and 2. The Mac has 3 cables labelled 1,2 and 3. I have connected cable 3 to pin 0, cable 1 to pin 1 and cable 2 to pin 2. It takes for ever to hook them up. Have I done it right? Almost every resource on the internet references the earlier 2 pin airport card. All help would be appreciated, cheers Jim
     
  2. eawmp1 macrumors 601

    eawmp1

    Joined:
    Feb 19, 2008
    Location:
    FL
    #2
    If it is working you are hooked up right.

    However the Mac Pro is a big, thick metal box and position of the router may make a difference. Try different positions of the router relative to the computer to see if signal strength varies.
     

Share This Page