iOttie Easy One Touch 2 Car Mount Holder for iPhone 6 (4.7)/Plus (5.5)

Discussion in 'iPhone Accessories' started by njhorn, Sep 17, 2014.

  1. njhorn macrumors member

    njhorn

    Joined:
    Sep 17, 2014
    #1
    I wrote a review and put a short video of my Spiegen Air case for my 6+ fitting into this car mount... Price is great, seems super high quality, and fits the 6+ well!

    http://www.amazon.com/review/R2ZE3MFOOZO8AS/ref=cm_cr_rdp_perm

    Received my easy one touch 2 on Monday along with my iPhone 6 plus spigen air case. I was nervous that even with a very thin case the 6plus would be too big for this mount. I was wrong! The case fits with about .25 inches on each side, and the clamps grab it strongly. My 2009 Nissan Rogue has both a deep windshield and no room close to me on the dash to put a mount, but with the telescoping arm I was able to easily mount this within a comfortable reach in the center of my dashboard above the radio and air vents. The suction cup is on tight and I am able to maneuver the mount into multiple positions easily. I've owned 4 or 5 mounts over the years, this is by far the best! can't wait to get my phone to put in this case and mount! Works great with my iPhone 5 also

    I am in no way affiliated with either company nor do i get anything for you buying this mount... Was just excited to find one that actually fits the 6+ and my car and wanted to share :)
     
  2. syclick macrumors regular

    Joined:
    Jan 19, 2009
    #2
    Considering the nook that held my iPhone 5 is now to small for the 6 Plus, I am definitely getting myself one of these.
     
  3. njhorn thread starter macrumors member

    njhorn

    Joined:
    Sep 17, 2014
    #3
    let me know if you want more pics or video of it... my case for my 6+ is really minimal, no way it would fit anything like an otter box... probably 1/4" or so open (maybe 1/3") on each side of case before snapping the arm clamps on it, but it definitely holds it tight...
     
  4. syclick macrumors regular

    Joined:
    Jan 19, 2009
    #4
    Hmm... I have one of the Spigen Neo Hybrid cases (which is quite minimal) on order, but I'd sorta toyed with the idea of also ordering the Slim Armor, which is a bit thicker.
     
  5. titans1127 macrumors 6502a

    Joined:
    Mar 10, 2009
    #5
    The slim armor definitely fits and like the OP said, even though there isn't much space on either side before the arms clamp on, its a real tight sturdy fit.
     
  6. syclick macrumors regular

    Joined:
    Jan 19, 2009
    #6
    Does this mount rotate? I can think of several applications I'd want to run in landscape mode while driving, especially with the 6 Plus's special landscape stuff.
     
  7. njhorn thread starter macrumors member

    njhorn

    Joined:
    Sep 17, 2014
  8. McBeats macrumors 6502a

    Joined:
    Apr 10, 2007
    Location:
    erf
    #8
    I went cheap and bought the easy one touch XL. mostly for one reason, had a slightly wider clip (up to 3.5") which helps for a bulkier case if need be. I currently have the original one touch and swear by it.

    According to ebay, the difference between these two products price-wise is only 5 bucks (20-25 bucks new). If the XL doesn't work out, I'll be getting a 2.
     
  9. Poob Bubes macrumors 6502a

    Poob Bubes

    Joined:
    Apr 16, 2007
  10. njhorn thread starter macrumors member

    njhorn

    Joined:
    Sep 17, 2014
  11. OneMike macrumors 603

    OneMike

    Joined:
    Oct 19, 2005
    #11
    How is it staying put so far?

    I use to have that civic a while ago and actually setup a mount in that same location. Different mount, but it popped loose every now and then. Let us know how it holds up.
     
  12. gzzzz macrumors newbie

    Joined:
    Sep 12, 2014
    #13
    I intend to use my 6 plus without a case.

    Do you think the side arms or the button in the middle will scratch the phone ? Do they have sufficient cushion material to protect the phone surface ?
     
  13. njhorn thread starter macrumors member

    njhorn

    Joined:
    Sep 17, 2014
    #14
    They do have a soft rubber on the insides of the clamps

    ----------

    Not sure if it will cause scratches or not. You could always put a soft Velcro or something taped onto it for protection also
     
  14. bova80 macrumors 6502a

    Joined:
    Jul 8, 2008
    Location:
    Pittsburgh, PA
    #15
    iOttie Easy One Touch 2 Car Mount Holder for iPhone 6 (4.7)/Plus (5.5)

    Bought one to replace my smaller iottie one touch since 6+ is to big for it. [​IMG]
    [​IMG]
    [​IMG]
     
  15. LouE37 macrumors member

    Joined:
    Jun 27, 2010
    #16
    Thx for the reviews and pics guys. Just installed this and can attest to its build quality and functionality. There isnt an application where you can't adjust this mount to an optimal location for viewing. And it fits my iphone 6 plus just fine with a spigen ultra hybrid case on it. One touch operations also a plus, kuddos to iOttie! Picked it up for $17.99 on Amazon.
     
  16. xmango macrumors newbie

    Joined:
    Sep 23, 2014
    #17
    I'm considering the iOttie one as well for my 6+. However, concerned :( about the lower arm blocking audio ports. ( sometimes my car and iphone refuse to pair over bluetooth. thanks iOS 8). does that impact sound ?
     

Share This Page