iPhone 3G LCD/Digitizer won't fit anymore?

Discussion in 'iPhone' started by wtfuatefolunch, Jul 21, 2011.

  1. wtfuatefolunch macrumors newbie

    Joined:
    Jul 21, 2011
    #1
    Hi, I just replaced a Digitizer + LCD on my iPhone 3G. Everything works fine but when it's seated, the top part won't sit flush inside... It's sticking out as if something is blocking it on the inside. I tried inserting it by sliding the glass part from the bottom to the top but no luck. There are no pieces obstructing the passage so I have no clue why it can't sit perfectly inside.

    Can someone please help me out? Thanks
     
  2. awadeee macrumors 68020

    awadeee

    Joined:
    Jan 21, 2011
    Location:
    Viper City
    #2
    Maybe the adhesive is not as strong as it should be?
     
  3. wtfuatefolunch thread starter macrumors newbie

    Joined:
    Jul 21, 2011
    #3
    Thanks for the reply.

    The adhesive seems to be ok and not too thick.
     
  4. awadeee macrumors 68020

    awadeee

    Joined:
    Jan 21, 2011
    Location:
    Viper City
    #4
    So is it the whole assembly that seems to stick out or is it the digitizer sticking out?
     
  5. wtfuatefolunch thread starter macrumors newbie

    Joined:
    Jul 21, 2011
    #5
    The whole assembly
     
  6. awadeee macrumors 68020

    awadeee

    Joined:
    Jan 21, 2011
    Location:
    Viper City
    #6
    Maybe the rubber suction around the edges isn't perfect. Things like that can happen if you buy third party parts. :eek:
     

Share This Page