iPhone 3GS proximity sensor fault

Discussion in 'iPhone Tips, Help and Troubleshooting' started by nst197, Jan 28, 2011.

  1. nst197 macrumors newbie

    Joined:
    Jan 28, 2011
    #1
    Hi,

    I recently replaced the digitizer on my iPhone 3gs after cracking it and all seemed well except the proximity sensor has stopped working. I read on here about someone else having a similar fault due to them getting glue on the sensor when glueing on the digitizer.
    I decided I didn't want to try and seperate the screen and digitizer again so instead bough a complete lcd and digitizer already assembled. Problem is I've fitted it and I still have the same problem :mad:. Everything works (including the earpiece) except the proximity sensor. I can't understand what else might be the problem, perhaps the connector itself? :confused:

    cheers,

    Nev
     
  2. Gadgetgeezer macrumors regular

    Joined:
    Oct 4, 2009
    #2
    Connector 3 is probably damaged or the proximity sensor ribbon itself. Seen it loads of times.
     

Share This Page