iPod touch & UConnect

Discussion in 'iPod touch' started by Vinsanity93, Mar 5, 2011.

  1. Vinsanity93 macrumors member

    Joined:
    Oct 30, 2010
    #1
    I just got a new 2011 Jeep Grand Cherokee and I paired my iPod touch with UConnect. Problem is that when I play songs, it comes out of the car speakers like its being fastforwarded and cuts off every second or so.

    How do I get it to play regularly? Or do I have to connect it via audio cable because it doesn't work with the USB cable either.
     
  2. SkippyThorson macrumors 65816

    SkippyThorson

    Joined:
    Jul 22, 2007
    Location:
    Utica, NY
    #2
    I know from experience that Ford Sync doesn't play well via USB with my HD based iPods. It's fine with a Nano though. In comparison to Chrysler's Uconnect, I would say just use a 3.5mm standard audio cord out of the headphone jack for best results. Music played by data source in cars (30-pin connector to USB) is typically more of a hassle than just plugging in an audio cord.

    * Also, this is the iPod section for the Classic / Nano / Shuffle. You'd probably have better luck in the iPod Touch section, here. *
    (Just request that a Mod moves this existing thread.)
     
  3. Vinsanity93 thread starter macrumors member

    Joined:
    Oct 30, 2010
    #3
    How do I do that lol, still new here...do I PM one or just make a post requesting it?
     
  4. SkippyThorson macrumors 65816

    SkippyThorson

    Joined:
    Jul 22, 2007
    Location:
    Utica, NY
    #4
    Not a problem, absolutely glad to have new members all the time!

    Actually, now that you mention it, I've seen people simply ask it in a post, but I think it's more of a game of chance waiting to see if they find it. :eek:

    In the bottom left corner of each post, there's a little off light / green light depending if you're here or not. Next to that is a little red triangle with a line. This is to report posts. You can use this for something offensive, or to request something beyond our control. I would do it for you, but I don't want them to think I'm reporting you for something bad. :p
     
  5. MacDawg macrumors P6

    MacDawg

    Joined:
    Mar 20, 2004
    Location:
    "Between the Hedges"
  6. Vinsanity93 thread starter macrumors member

    Joined:
    Oct 30, 2010
  7. goat32 macrumors newbie

    Joined:
    Mar 10, 2011
    #7
    Run update on your Ipod

    I just bought a Dodge Charger 2011 and I was having the same issue until tonight my ipod did and major update took about 45 minutes to complete and now my system plays fine. Run and update on your ipod that should fix it.:D
     
  8. msmira macrumors newbie

    Joined:
    May 17, 2011
    Location:
    Prague
    #8
    Hi, in my Grand Cherokee 2011 it works as dream using cable for iPod - the one from Mopar that connects to pin connector at dashboard case in the middle. However, there were some issues with iPhone 4. Everything works perfect after I updated system. Try latest version at: http://mofv.com/MyGIG/, version RER 2.402 software update. Follow their instruction. It takes ca. 30 minutes.
    Mirek
     
  9. Vinsanity93 thread starter macrumors member

    Joined:
    Oct 30, 2010
    #9
    Well I found a temporary fix for the high speed playback on bluetooth, just put the iPod touch on standby (screen turned off).
     
  10. Gunner0357 macrumors newbie

    Joined:
    Jan 30, 2015
    #10


    Were you ever able to fix this issue? I am having the same problem....Via the cord to the ipod touch from the usb port

    Tim
     

Share This Page