Kernel Panic : Please help me !

Discussion in 'iMac' started by kurushi, Dec 28, 2014.

  1. kurushi macrumors newbie

    Dec 28, 2014

    I have now kernel panic since a few weeks and i have done all this :

    1 -OS X reinstall (but not an erase & install), the problem is here again.

    2 -Deleted PRAM/NVRAM - no effect

    3 - Try to repair with : Onyx, Mavericks Cache Cleaner, no results.

    4 - I have put more RAM on my computer so I have tested with "Rember Ram Test" during one night : no problem detected :(

    I don't know what to do now .... :(

    Here my last Kernel Panic report today :

    Anonymous UUID: B28C4771-3B83-70CD-6896-35D41BACE17D

    Sun Dec 28 12:40:43 2014
    panic(cpu 0 caller 0xffffff80184dc43e): Kernel trap at 0xffffff7f98a3b75c, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff7f98a3b75c, CR3: 0x000000001b4fe000, CR4: 0x0000000000000660
    RAX: 0xffffff7f98a3b75c, RBX: 0x0000000000000001, RCX: 0x0000000000000070, RDX: 0xffffff8032ee9c00
    RSP: 0xffffff816ae5bf88, RBP: 0xffffff816ae5bfd0, RSI: 0x0000000000000000, RDI: 0xffffff8032ee9900
    R8: 0x0000000000000003, R9: 0x7ffffffffffffffe, R10: 0x0000000000000616, R11: 0x000000010b861000
    R12: 0xffffff818b1c3e50, R13: 0xffffff80184ddd7e, R14: 0x0000000000000070, R15: 0xffffff816ae5c000
    RFL: 0x0000000000010046, RIP: 0xffffff7f98a3b75c, CS: 0x0000000000000008, SS: 0x0000000000000000
    Fault CR2: 0xffffff7f98a3b75c, Error code: 0x0000000000000019, Fault CPU: 0x0

    Backtrace (CPU 0), Frame : Return Address
    0xffffff816ae5bc10 : 0xffffff8018422f79
    0xffffff816ae5bc90 : 0xffffff80184dc43e
    0xffffff816ae5be60 : 0xffffff80184f3976
    0xffffff816ae5be80 : 0xffffff7f98a3b75c
    0xffffff816ae5bfd0 : 0xffffff80184f3b39
    0xffffff818b1c3f50 : 0xffffff801843758a
    0xffffff818b1c3f90 : 0xffffff80184378d8
    0xffffff818b1c3fb0 : 0xffffff80184d7607
    Kernel Extensions in backtrace:[BC44CC56-BEAC-30C0-9A5F-AE7D939EEF48]@0xffffff7f98a2d000->0xffffff7f98a85fff

    BSD process name corresponding to current thread: kernel_task

    Mac OS version:

    Kernel version:
    Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
    Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
    Kernel slide: 0x0000000018200000
    Kernel text base: 0xffffff8018400000
    System model name: iMac10,1 (Mac-F2268DC8)

    System uptime in nanoseconds: 198672549475
    last loaded kext at 57960876728: 170.15 (addr 0xffffff7f999ee000, size 20480)
    loaded kexts:
    at.obdev.nke.LittleSnitch 4228 1.60 80.14 1.9.5d0 3.0 1.0.0d1 4.2.7f3 3.5.13 1.2.4 1.0.2d2 100.14.34 7.0.0 2.6.3f4 124 3.6.22 4.2.7f3 2.6.3f4 2.6.3f4 170.4.11 8.2.4 4.2.7f3 1 1.0.0 1.7.0 1.2.5 1.2.4 3.6.7 3.0.1 325.7 3.4.1 35 1.0.0d1 1.0.0d1 1.0.0d1 404 5.0.2 2.6.0 700.74.5 683.4.0 2.0 3.0.5 660.4.0 656.4.1 2.0.21 1.8 2.0 2.1 2.0 1.7 217.92.1 3 153 217.92.1 170.15 170.15 4.2.7f3 245.13.1 1.0 91.1 10.0.7 4.2.7f3 3.6.22 2.6.3f4 1.0.0 1.9.7fc2 1.14 1.0.4 2.4.1 2.2.6 4.2.7f3 2.6.3f4 2.6.3f4 3.1.8 1.0.0 1.0.12d1 5.7.1d6 1.0.12d1 1.2.4 3.6.22 2.4.1 3.6.7 1.7 1.7.1 1.7.1 660.4.0 3.6.0 3.6.7 650.4.0 656.4.1 4.5.5 2.6.1 3.6.7 640.36 2.0 660.4.2 2.0 2.6.5 686.4.1 3.2 2.2.9 2.0.0 1.1 7 278.11.1 1.0.0d1 23 371.1 1.9 2 28.30 2.0 2.9 1.4 1 1.0
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 12 GB, SMC 1.53f13
    Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280:
    Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: WDC WD1001FALS-40U9B0, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: USB2.0 Hub
    USB Device: USB2.0 Hub
    USB Device: Built-in iSight
    USB Device: Internal Memory Card Reader
    USB Device: Iomega Select HDD
    USB Device: DCP-195C
    USB Device: IR Receiver
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus:

    If someone could help me it will be awesome because I'm lost .......
    Thank you so much !!!!
  2. maflynn Moderator


    Staff Member

    May 3, 2009
    Is it a new iMac? Did you unplug all peripherals? Are there steps you do that can reproduce the issue? Did you run the Apple Hardware Test to see if anything kicks out?
    Did you try to remove the new ram and put in the old, or run with the old to see if the KPs stop?

    Personally, I'd call Apple and have them diagnose/repair it.
  3. kurushi thread starter macrumors newbie

    Dec 28, 2014
    Let's go


    Thank you for your help.
    First, it's not a new IMAC I have got it since december 2009.

    I have run Tech Tool Pro 7 and everything was fine.

    I will remove all the new Ram and see if the problem continue.

    After i come back and tell you, so in a few days normally.

    Thanks for you help ! :D
  4. bjmoose macrumors member

    Oct 4, 2011
    Try removing all USB devices, though my suspicion is the RAM
  5. cincygolfgrrl macrumors 6502


    Apr 2, 2012
    Somewhere In Time
    Do Apple Stores in France have the Genius Bar? If so you can take your Mac to them and they should at a minimum diagnose the problem for free. That's how it works in the US and see no reason France would be different.

    They might even be able to repair your Mac for a minimal charge, even though it's out of warranty. At the very least, you'll know exactly what's wrong and what to do about it.
  6. kurushi thread starter macrumors newbie

    Dec 28, 2014

    Thank you everybody for your help, it's make me happy !

    I have removed my new RAM today and now I wait to see in the future days if the problem is again here ..... :(

    I have removed my "D-Link 7-Port USB 2.0 Hub" and my scanner too.

    I'll tell you in a few days what's happening.

    See you soon ;)
  7. kurushi thread starter macrumors newbie

    Dec 28, 2014


    I have removed my new RAM and now no problem, no more KP :D

    So it's the RAM the problem :mad:

    Thank you so much for your help :)
  8. Rud3Bwoy Suspended


    Oct 9, 2011
    don't try those crappy ram test for mac,i tried it and said my ram was fine indeed it was faulty the new one i got from the company when i upgraded my mac had to switch out and test

    glad to see you figured it out

Share This Page