Late 2013 MBP battery issue

Discussion in 'MacBook Pro' started by cambox, Jan 23, 2014.

  1. cambox macrumors 6502

    Joined:
    Jun 8, 2010
    Location:
    omnipresent
    #1
    I have a Late 2013 MBP which I bought new a couple of months back, it seems to tun very hot and the battery lasts no longer than 3 hours on a full charge? Is this normal? Only using it for FCP editing so its not running anything to heavy.
     
  2. GGJstudios macrumors Westmere

    GGJstudios

    Joined:
    May 16, 2008
    #2
    It sounds like you could have a process that is consuming system resources, which would contribute to heat and rapid battery draining.

    Follow every step of the following instructions precisely. Do not skip any steps.
    1. Launch Activity Monitor
    2. Change "My Processes" at the top to "All Processes"
    3. Click on the "% CPU" column heading once or twice, so the arrow points downward (highest values on top). (If that column isn't visible, right-click on the column headings and check it, NOT "CPU Time")
    4. Click on the System Memory tab at the bottom.
    5. Take a screen shot of the entire Activity Monitor window, then scroll down to see the rest of the list, take another screen shot
    6. Post your screenshots.

    There are many factors that impact your battery life. See the BATTERY LIFE FROM A CHARGE section of the following link for details, including tips on how to maximize your battery life.
    The link below should answer most, if not all, of your battery/charging questions. If you haven't already done so, I highly recommend you take the time to read it.
    If you're not already doing so, use iStat Pro (free) or iStat Menus ($16) to get accurate readings of your temps, fan speeds, etc., rather than relying on your sense of touch or sound. A forum member has posted a copy of iStat Pro that has been "tweaked" to enhance compatibility with Mountain Lion. You can download it here.
    The Intel processors used in Macs are designed to automatically shut down to prevent damage if they truly overheat. CPU Tjmax = 105C (221F), GPU Tjmax = 100C (212F) on i3, i5, i7 processors. (Source: Intel)
    Unless there is a rare defect in a Mac, most temps are well within the normal operating range, considering the workload being put on it. Websites with Flash content, games and other multimedia apps will put higher demand on the CPU/GPU, generating more heat. This is normal. If you're constantly putting high demands on your system, such as gaming or other multimedia tasks, expect temps to rise and fans to spin up accordingly. It's just your Mac doing its job to maintain temps within the normal range.
    It is also quite normal for your Mac to become extremely hot to the touch during intensive operations. The aluminum body transfers heat more effectively than other materials used in computer casings, so you will feel the heat more. This doesn't indicate that it's overheating and will not harm the computer to be hot to the touch.
    Your fans are always on when your Mac is on, spinning at a minimum of 2000 rpm (for MBPs) or 1800 rpm (for MBAs, MBs and minis), or 1200 for the newest MBAs. Older iMacs have 3 fans with minimum speeds in the 800-1200 range, while the newest iMacs have a single fan, spinning at a minimum of about 1400 rpm. They will spin faster as needed to keep temps at a safe level. If your fans are spinning up without increased heat, try resetting the SMC. (PRAM/NVRAM has nothing to do with these issues, so resetting it will not help.)
    The intake and exhaust vents are in the back of the computer near the hinge on all notebooks in the MacBook line (except the new MBP with retina display, which has intake vents along the sides at the bottom). The iMac vent is a slot on the back near the top of the computer. Make sure the vents remain unblocked to allow your computer to perform at its best. For Flash-related issues:
     
  3. cambox thread starter macrumors 6502

    Joined:
    Jun 8, 2010
    Location:
    omnipresent
    #3
    Many thanks, I will do this right away, it's never been right but wasn't aware there seemed to be an issue with others, just thought sods law its just mine.
     
  4. GSPice macrumors 68000

    GSPice

    Joined:
    Nov 24, 2008
    #4
    :eek: FCP is "heavy"!

    Good post above about checking hardware status. I'd also recommend looking up on some FCP forums about battery life - if you're rendering all day long that'll definitely juice the battery quick.
     

Share This Page