Leopard on SW RAID0 set can't booting automatically, Can I fixed it

Discussion in 'Mac Pro' started by Amethyst, Dec 12, 2008.

  1. Amethyst macrumors 6502

    Joined:
    Aug 8, 2006
    #1
    My Configuration
    HDD1 (original 320 GB) -> OS X 10.5.5
    HDD2 + HDD3 (160+160=320 GB) -> OS X 10.5.5 on SW RAID0
    HDD4 (1TB) -> flies

    but now i can't setting to boot, OS X on SW Raid0 automatically, i must hold option when i power on my mac pro, and the select one of SW Raid HDD to boot, unlike booting os x from HDD1 (that is normal install)

    can i fixed it to automatically boot from RAID0 installation

    Thank you very much
     
  2. Vanyasteen macrumors newbie

    Joined:
    Feb 10, 2008
    #2
    Reset PRAM. Computer will reboot from the drive in bay #1. Open Startup Disk CP. Your raid should now be visible as a single volume. Select it. Reboot.

    This drove me crazy too.
     
  3. Amethyst thread starter macrumors 6502

    Joined:
    Aug 8, 2006

Share This Page