Looking for a particular skin

Discussion in 'iPhone Accessories' started by 3rdiguy, Apr 5, 2017.

  1. 3rdiguy macrumors 6502a

    3rdiguy

    Joined:
    Sep 17, 2012
    #1
    IMG_5493.JPG Hello all,

    I've always been a fan of the design of the first iPhone. Does anyone know where I can find a skin for the 7 Plus that looks like that first generation model? I cannot find any solo images of that rear portion to upload to Slickwraps for customization. Any tips or suggestions would be greatly appreciated. Here is the image of it at the top---^
     
  2. 3rdiguy thread starter macrumors 6502a

    3rdiguy

    Joined:
    Sep 17, 2012
    #3
  3. daynoock macrumors member

    Joined:
    Dec 6, 2016
    #4
    That was when I first installed it, only got the one angle. It covers the sides too
     

    Attached Files:

  4. 3rdiguy thread starter macrumors 6502a

    3rdiguy

    Joined:
    Sep 17, 2012
    #5
    Thanks. I'm going to have to get a heat gun and then I'll order it. I have a totallee clear case that I'll put on top of it for protection
     
  5. daynoock macrumors member

    Joined:
    Dec 6, 2016
    #6
    I didn't use a heat gun and mine has stayed on fine, personal preference though I suppose
     
  6. AndrewR23 macrumors 68040

    Joined:
    Jun 24, 2010
    #7
  7. 3rdiguy thread starter macrumors 6502a

    3rdiguy

    Joined:
    Sep 17, 2012
    #8
    well that's even better. hopefully I can do that as well
     
  8. daynoock macrumors member

    Joined:
    Dec 6, 2016
    #9
    Didn't use heat or a spray. Years ago I did a zagg installation course with a previous employer, if you use water with a tiny bit of washing up liquid it's fine.

    Cover the skin in liquid so you can manoeuvre it freely and then use a bank card to remove the liquid from underneath
     

Share This Page