MP 7,1 Mac Pro diagnostic code PPF004

[Rimmsi]

Hi, I recently bought a used Mac Pro 7.1 on ebay. Everything seems to work as it should, the machine is incredibly quiet and cool and looks like new. I just replaced the w5700x module with an RX 6900 XT. This afternoon out of curiosity I ran the device diagnostics and after the test finished I got the error code PPF004 which means the fan has failed. Using the iStat menus, I manually tested all the fans and got to the maximum speed (blower 1406rpm, front fans 2740rpm). Emotionally, it seems to me that everything is fine and nothing squeaks or makes a bad sound. Has anyone encountered a similar situation on their MP 7.1? Thank you.

 

[DeltaMac]

That PPF004 does NOT mean "the fan has failed".
PPF004 actually means that "there may be an issue with the fan"
You have checked the fans, and I think you do not agree the fan has failed.
If you used a utility, such as Macs Fan Control, or smcFanControl, to test the fans from idle to full speed, then back to idle and no problem found, then the error that you see may be just a "false positive" that you can probably choose to ignore.

Be sure to try an NVRAM reset, if you have not already tried that.
Just curious - Does that hardware test pass if you use the old W5770X, instead of the RX6900XT?

 

[Rimmsi]

I tried only test with the RX 6900 XT. Even after resetting the NVRAM I still get the PPF004 error code. I can try it when I have time.

 

[Rimmsi]

So I swapped graphics card back to the W5700X and the test completed without error. Oh, I was really worried it was going to be something more serious. Thank you for your help.