Mine never leaves the 40's you need it looked at.
u must live somewhere cold or ur house is cold cause mine is always in the low to mid 50's
Mine never leaves the 40's you need it looked at.
Hello!
I have a strange problem my macbook gets really hot, the cpu once went up to 80 celsius and i only had Safari one, i also had finder one and was copying some files to an usb memory.
When i do some video conversion it goes to 85 celsius instantly!
Anyone knows what's can be wrong i only had it for 6 months, i can also recall that this problems began after i did a restore with the leopard discs can this be the reason or is it just a convenience?
Any help is greatly appreciated!
Nope - 95C is where you have to start worrying... cuz if it evaporates water in the air and that water turns to steam, it can play havoc with your logic board... we know the boiling point is 100C - but 95 is the REDLINE - after all, why take chances??
as long as you're under that, you're good.
but DO download SMC FanControl and use it to cool off ur MB.
So you think i will be all-right? I'm not to sure about smcfancontrol is it safe to use it, it can't hurt the computer in anyway?
The problem is not the thermal paste being misapplied.
The problem is Apple's cooling design. The only fan is an output fan. There is no in-take and there is no way to circulate air. Plus everything is so tight inside of the case that there isn't much room to "breathe".
My MacBook has the 2.16GHz Core 2 Duo (Merom processor, Napa platform). It gets up to 88c while encoding video.
My HP (with a thicker case, proper ventilation in the case, and a fan that sucks air in and blows it out the back) peaks at 61c under full load.
It is safe. I have smcFanControl running since I got my MacBook, and have it set to 3600rpm.
The program sets the fan to run at a higher speed than the factory settings. When the CPU temperature rises above the threshold for a given fan speed, then the fan controller will spin the fan faster than the speed you have set. So it's impossible to set the fan speed to low and overheat your Mac.
Nope - 95C is where you have to start worrying... cuz if it evaporates water in the air and that water turns to steam, it can play havoc with your logic board... we know the boiling point is 100C - but 95 is the REDLINE - after all, why take chances??
as long as you're under that, you're good.
but DO download SMC FanControl and use it to cool off ur MB.
i'm on a macbook and smcFanControl says its not supported on launch, but the readme says it is. anyone else getting this?
These CPU temps that you guys are saying are normal, are actually quite crazy and way too high. I have a white MacBook 2.1Ghz on the way, and I have to say I'm not happy to be reading this. How involved is it to apply new thermal paste like ArticSilver to a MacBook CPU, and does it invalidate your warranty?
I had been planning to buy a MacBook for work and school, and finally decided last week that for the hardware that you get, it just isn't worth the price (as cool as OSX is.) I ended up buying an Acer instead, with better hardware specs other than a slightly slower AMD dual core, for less than half the price. It runs 41C on low power stuff and barely into the 60s under a load -- which is what I would expect. High 80s and 90s is WAY to high for a CPU to be running. Yes, it can handle it for a time, but it shouldn't have to.
So the day after I bought my Acer laptop, work told me they were thinking about buying me a MacBook to do some stuff on, and last night my boss said he ordered it. They're gonna load some software on it and then ship it to me. So now I'm kind of torn, and reading this about the CPU temps sure doesn't help.
BTW, I also have a Mini (that I'm VNC-ing into from this Acer) and an 8G Touch, so don't think I'm knocking Macs.![]()
There is just no way anyone should be happy with temps that are literally close to the boiling point of water.