Macbook just changed the Bottom WHITE Base now it snot working..

Discussion in 'Mac Basics and Help' started by moonload, Feb 7, 2010.

  1. moonload macrumors newbie

    Joined:
    May 11, 2009
    #1
    hi the my macbook has small cracked in bottom base so i likes to change the bottom base so which is i did.. i have put black colour base on now its giving me problem which is

    it does not turn on however the battery is charge so i hope there is not a problem in logic board

    so whats went wrong guys is anybody have same problem as me?
     
  2. cmaier macrumors G4

    Joined:
    Jul 25, 2007
    Location:
    California
  3. gilkisson macrumors 65816

    gilkisson

  4. velocityg4 macrumors 601

    velocityg4

    Joined:
    Dec 19, 2004
    Location:
    Georgia
    #4
    Though the unfortunate typo is funny. I would say to the thread starter that in all likelihood you did not reconnect all cables. Possible you just did not fully reseat the RAM or reconnect the palm rest area to the Motherboard.

    I would start with the easiest step of removing the RAM then placing back in making sure it is firmly seated. Then move on to removing the palm rest to make sure it's connector is seated before going into a full dis-assembly then reassembly.

    If you did not do so the first round use the repair guides on iFixit.com for a full tear-down procedure.
     
  5. BlueRevolution macrumors 603

    BlueRevolution

    Joined:
    Jul 26, 2004
    Location:
    Montreal, QC
    #5
    Assuming that all connections are correct, I suspect you did indeed damage your logic board during disassembly. Would you like a tissue?
     

Share This Page