MacBook Pro Won't Power Up

Discussion in 'MacBook Pro' started by PIX, May 22, 2015.

  1. PIX macrumors member

    Joined:
    Feb 19, 2008
    #1
    I have a MacBook Pro (mid 2012) and when I press the power button it won't power up. The MagSafe power adapter doesn't light up when plugged into the laptop. Do you think the issue is a defective battery or something else? I would swap out the batter but I don't have a spare. Would appreciate comments from someone who has experienced this issue or some ideas?
     
  2. MagicBoy macrumors 68040

    MagicBoy

    Joined:
    May 28, 2006
    Location:
    Manchester, UK
  3. simonsi macrumors 601

    simonsi

    Joined:
    Jan 3, 2014
    Location:
    Auckland
    #3
    Beg/borrow another Magsafe (Apple store).
    Check your Magsafe on another Mac

    Assuming only one issue at a time, probably the Magsafe went out then the battery is flat BUT it could be the Magsafe board in the MBP...

    When was it last used and what happened?
     
  4. skyway macrumors newbie

    Joined:
    Oct 25, 2014
    #4
    if no light on power cord take out magsafe put your finger on resistors if light on magsafe is good. later check sense line on logic board try do jump wire, connect power cable if still no green light you need change power end charge chip. New chip about 10 pound easy change yourself
     

Share This Page