MacRumors Giveaway: Win a 'MagicMount Pro Charge' Wireless Charger for iPhone From Scosche

Discussion in 'iOS Blog Discussion' started by MacRumors, Jan 18, 2019.

  1. MacRumors macrumors bot

    MacRumors

    Joined:
    Apr 12, 2001
    #1
    [​IMG]


    For this week's giveaway, we've teamed up with Scosche to offer MacRumors readers a chance to win one of the company's MagicMount Pro Charge wireless chargers.

    Priced at $69.99, the MagicMount Pro Charge is a versatile, upright wireless charging mount that can go anywhere, offering charging capabilities and easy access to the iPhone wherever it might be.

    [​IMG]

    You can use the MagicMount Pro Charge on a desk, in the car for access to maps, in the kitchen for viewing recipes, and more.

    The MagicMount Pro uses magnets to hold your iPhone in place, with no base or cradle required, keeping it at an optimum viewing height with an unobscured display and accessible ports.

    [​IMG]

    There are magnets built into the MagicMount Pro Charge, which work with a metal MagicPlate that attaches to the iPhone. The magnets do not impede wireless charging, with the MagicMount Pro Charge offering 7.5W charging for Apple devices and 10W charging for Android devices.

    The MagicPlate attaches to the back of an iPhone or an iPhone case using an adhesive, with the iPhone plate able to be easily removed.

    [​IMG]

    A StickGrip suction base at the bottom makes sure the MagicMount stays in place while you're using it, and the charging portion can be swiveled, rotated, or tilted so you can adjust your iPhone's display to where you want it.

    [​IMG]

    A power adapter is included with the MagicMount Pro Charge, with the cord routed through the base of the device. As with most wireless chargers, foreign object detection is included to prevent accidents from overheating.

    [​IMG]

    MagicMount Pro Charge is Qi-certified and has been laboratory tested to ensure safety, energy efficiency, interoperability, and more. The charger works with the iPhone 8, 8 Plus, X, XR, XS, and XS Max.

    We have eight of Scosche's MagicMount Pro Charge accessories to give away. To enter to win, use the Rafflecopter widget below and enter an email address. Email addresses will be used solely for contact purposes to reach the winners and send the prizes. You can earn additional entries by subscribing to our weekly newsletter, subscribing to our YouTube channel, following us on Twitter, following us on Instagram, or visiting the MacRumors Facebook page.

    Due to the complexities of international laws regarding giveaways, only U.S. residents who are 18 years or older and Canadian residents (excluding Quebec) who have reached the age of majority in their province or territory are eligible to enter. To offer feedback or get more information on the giveaway restrictions, please refer to our Site Feedback section, as that is where discussion of the rules will be redirected.


    The contest will run from today (January 18) at 11:00 a.m. Pacific Time through 11:00 a.m. Pacific Time on January 25. The winners will be chosen randomly on January 25 and will be contacted by email. The winners will have 48 hours to respond and provide a shipping address before new winners are chosen.

    Article Link: MacRumors Giveaway: Win a 'MagicMount Pro Charge' Wireless Charger for iPhone From Scosche
     
  2. roland.g macrumors 603

    roland.g

    Joined:
    Apr 11, 2005
    Location:
    One mile up and soaring
    #2
    I thought using these plates in a case or inside your case made it so you couldn’t wirelessly charge an iPhone 8, X, etc. due to the interference of the metal plate.
     
  3. TheWatchfulOne macrumors 6502

    TheWatchfulOne

    Joined:
    Jun 19, 2009
    #3
    I'm sure the large plate that is pictured would interfere with wireless charging. However, they also picture two smaller plates that correlate to the two small magnets that are placed outside of where the coils are. Seems like the smaller plates would not interfere with wireless charging.

    However, I do think, sticking these plates on the outside of your case would interfere with the aesthetics of the phone.;)
     
  4. Mw0103 macrumors regular

    Joined:
    Feb 22, 2014
    #4
    Works just fine. There is no metal over the coil with either of these solutions.
    --- Post Merged, Jan 18, 2019 ---
    The large “plate” is really plastic with metal on the top and bottom edges. No interference.
     
  5. bLackjackj macrumors member

    Joined:
    Nov 14, 2016
  6. dfs macrumors 6502

    Joined:
    Sep 17, 2008
    Location:
    California
    #6
    There are already a couple of products more or less like this that have been on the market for some time (offered by Mophie and Xvidia), so you can't exactly say Scosche is filling a vacuum. The only interesting new wrinkle is that you can doctor any case you have rather than having to use theirs, which means you can use it with any model of iPhone or Android, which a lot of people will appreciate who have models not supported by the competition. What would be even more useful would be if they would take the Magic Mount and scale it up so it could be used with iPads. I'd happily part with some Big Bucks to get my hands on that!
     
  7. bstpierre macrumors 6502a

    Joined:
    Mar 28, 2008
    #7
    "We have eight of Scosche's MagicMount Pro Charge accessories to give away."
     

Share This Page